Instituto de Ciencias Aplicadas y Tecnología, Universidad Nacional Autónoma de México, Mexico City, Ciudad de México, México.
Instituto de Física, Universidad Nacional Autónoma de México, Mexico City, Ciudad de México, México.
PLoS One. 2024 Oct 31;19(10):e0312611. doi: 10.1371/journal.pone.0312611. eCollection 2024.
This work aims to produce hybrid materials with potential applications in dye photodegradation. Therefore, hybrid films were obtained by incorporating cobalt (II, III) oxide (Co3O4) or cobalt ferrite (CoFe2O4) nanoparticles (NPs) with 18 ± 1.6 nm and 26 ± 1.3 nm, respectively, into a poly 3-hydroxybutyrate (P3HB) polymeric matrix. The Co3O4@P3HB and CoFe2O4@P3HB hybrid films were fabricated by solvent casting in a ratio of 85 mg to 15 mg (P3HB-NPs). Different spectroscopic and microscopy techniques characterized the Co3O4 and CoFe2O4 NPs and the P3HB, Co3O4@P3HB and CoFe2O4@P3HB films. The optical band gap for Co3O4 and CoFe2O4 NPs was estimated from their diffuse reflectance spectra (DRS) around 2.5 eV. X-ray diffraction (XRD) of the hybrid films revealed that the nanometric sizes of the Co3O4 and CoFe2O4 nanoparticles incorporated into the P3HB are preserved. The magnetic hysteresis curve of CoFe2O4 nanoparticles and CoFe2O4@P3HB film showed a ferromagnetic behaviour at 300 K. Transmission electron microscopy (TEM) confirmed the formation of nanocrystals, and scanning electron microscopy (SEM) provided evidence for the successful incorporation of the NPs into the P3HB matrix. The surface roughness and hydrophilicity of the hybrid films are increased compared to the P3HB film. The impact of the nanoparticles and the hybrid films on the photodegradation of methyl orange (MO) in its acidic form was studied. The photodegradation tests were carried out by direct sunlight exposure. The CoFe2O4@P3HB hybrid film achieved 85% photodegradation efficiency of a methyl orange solution of 20 ppm after 15 minutes of exposure to sunlight. After 30 minutes of exposure to sunlight, the nanoparticles and the hybrid films reached about 90% of the MO degradation. The results suggest that combining nanoparticles with the polymer significantly enhances photodegradation compared to isolated nanoparticles.
这项工作旨在制备具有潜在应用于染料光降解的杂化材料。因此,通过将钴(II,III)氧化物(Co3O4)或钴铁氧体(CoFe2O4)纳米粒子(NPs)分别以 18±1.6nm 和 26±1.3nm 的尺寸掺入聚 3-羟基丁酸酯(P3HB)聚合物基质中,得到了杂化薄膜。Co3O4@P3HB 和 CoFe2O4@P3HB 杂化薄膜是通过溶剂浇铸法以 85mg 至 15mg(P3HB-NPs)的比例制备的。不同的光谱和显微镜技术对 Co3O4 和 CoFe2O4 NPs 以及 P3HB、Co3O4@P3HB 和 CoFe2O4@P3HB 薄膜进行了表征。通过它们的漫反射光谱(DRS)估算 Co3O4 和 CoFe2O4 NPs 的光学带隙约为 2.5eV。杂化薄膜的 X 射线衍射(XRD)表明,掺入 P3HB 中的纳米 Co3O4 和 CoFe2O4 纳米粒子的纳米尺寸得以保留。CoFe2O4 纳米粒子和 CoFe2O4@P3HB 薄膜的磁滞回线在 300K 时表现出铁磁性。透射电子显微镜(TEM)证实了纳米晶的形成,扫描电子显微镜(SEM)为 NPs 成功掺入 P3HB 基质提供了证据。与 P3HB 薄膜相比,杂化薄膜的表面粗糙度和亲水性增加。研究了纳米粒子和杂化薄膜对酸性形式的甲基橙(MO)光降解的影响。光降解测试是通过直接阳光照射进行的。在暴露于阳光 15 分钟后,CoFe2O4@P3HB 杂化薄膜对 20ppm 的甲基橙溶液的光降解效率达到 85%。暴露于阳光 30 分钟后,纳米粒子和杂化薄膜对 MO 的降解率达到约 90%。结果表明,与单独的纳米粒子相比,将纳米粒子与聚合物结合可显著提高光降解效率。