Highly porous sildenafil loaded polylactic acid/polyvinylpyrrolidone based 3D printed scaffold containing forsterite nanoparticles for craniofacial reconstruction.

Tissue engineering has emerged as a promising substitute for traditional tissue repair methods. Nowadays, advancements in 3D printing technology have enabled the fabrication of customized scaffolds to support tissue regeneration. In the present study, a polylactic acid-polyvinylpyrrolidone 3D-printed scaffold containing 10 % forsterite was fabricated. Subsequently, lyophilized fucoidan microstructures loaded with sildenafil were filled the channels of this 3D-printed scaffold. The fabricated scaffold loaded with sildenafil was thoroughly characterized, revealing that 97.46 % of the loaded sildenafil was released in a sustained manner over 28 days. Furthermore, the biocompatibility of MG63 was evaluated through cell viability and adhesion tests. The findings indicated a direct and favorable influence on cell behavior. Based on the chicken chorioallantoic membrane assay, the fabricated scaffold significantly increases angiogenesis due to the sustained release of sildenafil. Moreover, in-vivo studies conducted on a rat model demonstrated that the 3D-printed scaffold was able to stimulate and accelerate the repair of calvarial defects within 8 weeks, and the amount of new bone tissue formation was significantly higher than that of other experimental groups. Based on the comprehensive in-vitro and in-vivo assessments, the scaffold with a macro- and microporous structure combined with the ability to release sildenafil is suggested as a potential candidate for repairing bone tissue, especially in the context of skull defects.