Nie Wei, Wang Yisha, Hu Chao, Wei Xi, Cui Hua
Key Laboratory of Precision and Intelligent Chemistry, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Department of Chemistry, University of Science and Technology of China, Hefei, Anhui, 230026, PR China.
Key Laboratory of Precision and Intelligent Chemistry, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Department of Chemistry, University of Science and Technology of China, Hefei, Anhui, 230026, PR China.
Anal Chim Acta. 2024 Dec 15;1332:343379. doi: 10.1016/j.aca.2024.343379. Epub 2024 Oct 29.
Most electrochemiluminescence (ECL) analytical methods involve only changes in one single signal, which greatly limits their high sensitivity and stability for applied research. Potential-resolved electrochemiluminescence (PRECL), which provides calibrated analysis by self-correcting signal responses from dual channels, has attracted great interest in recent years. However, research on PRECL nanomaterials is still at an early stage. It is critical to develop a novel PRECL nanocomposite with high intensity in light emission, high resolution in potential separation, and reduced complexity in reaction systems for accurate detection.
Here, a novel PRECL nanocomposite, L012-Au/g-CN, was synthesized by in situ growth of L012-reduced gold nanoparticles (L012-Au) on the surface of graphitic carbon nitride (g-CN) nanosheets. The g-CN nanosheets served as effective carriers for L012 molecules and L012-Au, as well as efficient cathodic ECL emitters. With the addition of a single co-reactant (KSO), two fully separated ECL peaks were observed around -1.3 V (ECL-1) and +0.6 V (ECL-2) at neutral conditions. The catalytic character of the incorporated gold nanoparticles accelerated the anodic ECL reaction and greatly enhanced the ECL intensity. Furthermore, an ECL mechanism based on the competitive relationship between KSO and dissolved oxygen was proposed. When dopamine (DA) was introduced into the PRECL reaction system, ECL-1 remained essentially unchanged, while ECL-2 intensity was significantly reduced. By analyzing the intensity ratio of ECL-2 to ECL-1 (I/I) to the detecting target, a ratiometric DA sensor with high sensitivity and stability was successfully constructed.
A nanocomposite L012-Au/g-CN that can induce high-intensity ECL with two separated potentials in each polarity has been prepared by a simple synthetic method. The developed ratiometric sensor can eliminate systematic errors and improve accuracy. In addition, the multifunctionality of the nanocomposite and the necessity of only one co-reactant for neutral-condition ECL greatly reduced the reaction complexity. Our work offers new PRECL solutions to design highly sensitive and stable multi-response detection systems for in vitro diagnostics.
大多数电化学发光(ECL)分析方法仅涉及单一信号的变化,这极大地限制了其在应用研究中的高灵敏度和稳定性。电位分辨电化学发光(PRECL)通过对双通道的信号响应进行自我校正来提供校准分析,近年来引起了极大关注。然而,PRECL纳米材料的研究仍处于早期阶段。开发一种新型的PRECL纳米复合材料至关重要,该复合材料应具有高发光强度、高电位分离分辨率以及降低反应系统的复杂性,以实现准确检测。
在此,通过在石墨相氮化碳(g-CN)纳米片表面原位生长L012还原金纳米颗粒(L012-Au),合成了一种新型的PRECL纳米复合材料L012-Au/g-CN。g-CN纳米片作为L012分子和L012-Au的有效载体,以及高效的阴极ECL发射体。在加入单一共反应剂(KSO)后,在中性条件下于-1.3 V(ECL-1)和+0.6 V(ECL-2)附近观察到两个完全分离的心电化学发光峰。掺入的金纳米颗粒的催化特性加速了阳极ECL反应并大大增强了ECL强度。此外,还提出了一种基于KSO与溶解氧之间竞争关系的心电化学发光机制。当将多巴胺(DA)引入PRECL反应系统时,ECL-1基本保持不变,而ECL-2强度显著降低。通过分析ECL-2与ECL-1的强度比(I/I)与检测目标的关系,成功构建了一种具有高灵敏度和稳定性的比率型DA传感器。
通过一种简单的合成方法制备了一种纳米复合材料L012-Au/g-CN,其能够在每个极性中以两个分离的电位诱导高强度的ECL。所开发的比率型传感器可以消除系统误差并提高准确性。此外,纳米复合材料的多功能性以及中性条件下ECL仅需一种共反应剂的必要性大大降低了反应复杂性。我们的工作为设计用于体外诊断的高灵敏度和稳定的多响应检测系统提供了新的心电化学发光解决方案。