Linehan J H, Dent J, Dodds W J, Hogan W J
Am J Physiol. 1985 Feb;248(2 Pt 1):G251-5. doi: 10.1152/ajpgi.1985.248.2.G251.
In 1976 Dent (Gastroenterology 71: 263-267) introduced a sleeve-catheter device for obtaining continuous recording of lower esophageal sphincter pressure. The infused sleeve accommodates for axial sphincter movement by providing a large surface of collapsible membrane that is capable of sensing maximal sphincter pressure at any point along the sleeve. Although sleeve performance was tested previously, the precise physical principal of its function has not been delineated. This study tests the hypothesis that the sleeve device functions as a Starling resistor. The term "Starling resistor" is an eponym that designates the physics of fluid flow through collapsible tubes. When pressure at any point along an infused collapsible conduit is greater than the intraluminal pressure at the distal end of the conduit, partial collapse occurs at some axial location along the conduit where the transmural pressure equals zero. The location of zero transmural pressure is termed the "equal pressure point" (EPP). The partial collapse at the EPP causes a local change in luminal resistance that is directly related to the magnitude of the external pressure at the EPP and accompanied by a corresponding change in the pressure upstream from the EPP. A correlate to the performance of Starling resistors is that the pressure upstream to the EPP is not affected by the downstream pressure, so long as the downstream pressure is less than the external pressure. To test our hypothesis, we evaluated sleeve performance in vitro using a two-chambered model that allowed application of static or oscillatory pressures at one or two sites along the sleeve.(ABSTRACT TRUNCATED AT 250 WORDS)
1976年,登特(《胃肠病学》71卷:263 - 267页)介绍了一种用于连续记录食管下括约肌压力的套囊导管装置。灌注套囊通过提供一个可塌陷的大膜表面来适应括约肌的轴向运动,该膜表面能够在套囊沿线的任何点感应到最大括约肌压力。尽管此前已对套囊性能进行了测试,但其功能的确切物理原理尚未阐明。本研究检验套囊装置起斯塔林电阻作用这一假说。“斯塔林电阻”一词是一个专用术语,指流体通过可塌陷管道的物理现象。当沿灌注的可塌陷导管任何一点的压力大于导管远端的管腔内压力时,在导管沿线的某个轴向位置会发生部分塌陷,此处跨壁压力等于零。跨壁压力为零的位置称为“等压点”(EPP)。等压点处的部分塌陷会导致管腔阻力局部变化,这与等压点处的外部压力大小直接相关,并伴有等压点上游压力的相应变化。与斯塔林电阻性能相关的一点是,只要下游压力小于外部压力,等压点上游的压力就不受下游压力影响。为检验我们的假说,我们使用双腔模型在体外评估套囊性能,该模型允许在套囊沿线的一个或两个部位施加静态或振荡压力。(摘要截取自250词)