Suppr超能文献

谷物多糖的物理特性与软摩擦学之间的关系——谷物来源和麦芽处理改性的重要性

Relationship Between Physical Characteristics of Cereal Polysaccharides and Soft Tribology-The Importance of Grain Source and Malting Modification.

作者信息

Moreno Ravelo Rolando Cesar, Gastl Martina, Becker Thomas

机构信息

Technical University of Munich, TUM School of Life Sciences, Chair of Brewing and Beverage Technology, Group Raw Material Based Brewing and Beverage Technology Freising Germany.

Research Center Weihenstephan for Brewing and Food Quality Technical University Munich Freising Germany.

出版信息

Food Sci Nutr. 2025 Jan 7;13(1):e4699. doi: 10.1002/fsn3.4699. eCollection 2025 Jan.

Abstract

Starch and non-starch polysaccharides ((N)SPs) are relevant in cereal-based beverages. Although their molar mass and conformation are important to the sensory characteristics of beer and non-alcoholic beer, their triggering mechanism in the mouth is not fully understood. Soft tribology has emerged as a tool to mimic oral processing (drinking). The contribution of each (N)SPs to the friction coefficient can be determined when they are enzymatically isolated and characterized by chromatography techniques. Thus, this work aimed to study the relationship between the physical characteristics of isolated (N)SPs and their possible contribution to oral processing through soft tribology (friction). To accomplish this, this research analyzes the effect of grain source (barley, wheat, and oats) and its modification (by steeping degree at two levels) to the (N)SPs´ physical characteristics in wort produced on a laboratory scale. Different characteristics were present in the (N)SPs due to the grain source and the degree of modification. When comparing the impact of the grain source, the malted oats showed the highest molar masses. A higher modification degree produced smaller and more compact structures except for wheat's arabinoxylans and dextrins. The conformation ratio ( ) values indicate the existence of sphere and micro-gel structures within each (N)SPs, with branches in arabinoxylans and dextrins. Subsequently, soft tribology was measured on all the worts and their correlation to the (N)SPs' data was performed by multivariate analysis. The wort produced with high modification grains generated higher friction responses. However, this was only statistically significant in barley samples. The multivariate analysis showed that within the mouth (tongue) velocity, the apparent density of the (N)SPs, and the molar mass of arabinoxylans and β-glucans may influence the friction response and, hence, the oral processing in the mouth during oral processing (drinking).

摘要

淀粉和非淀粉多糖((N)SPs)在谷物基饮料中具有重要意义。尽管它们的摩尔质量和构象对啤酒和无醇啤酒的感官特性很重要,但其在口腔中的触发机制尚未完全了解。软摩擦学已成为一种模拟口腔加工(饮用)的工具。当通过色谱技术对每种(N)SPs进行酶解分离和表征时,可以确定它们对摩擦系数的贡献。因此,本研究旨在通过软摩擦学(摩擦)研究分离出的(N)SPs的物理特性与其对口腔加工可能贡献之间的关系。为实现这一目标,本研究分析了谷物来源(大麦、小麦和燕麦)及其改性(通过两个水平的浸泡程度)对实验室规模生产的麦芽汁中(N)SPs物理特性的影响。由于谷物来源和改性程度的不同,(N)SPs呈现出不同的特性。在比较谷物来源的影响时,发芽燕麦显示出最高的摩尔质量。除了小麦阿拉伯木聚糖和糊精外,较高的改性程度会产生更小、更紧凑的结构。构象比( )值表明每种(N)SPs中存在球形和微凝胶结构,阿拉伯木聚糖和糊精中有分支。随后,对所有麦芽汁进行了软摩擦学测量,并通过多变量分析将其与(N)SPs的数据进行了相关性分析。用高改性谷物生产的麦芽汁产生了更高的摩擦响应。然而,这仅在大麦样品中具有统计学意义。多变量分析表明,在口腔(舌头)速度、(N)SPs的表观密度以及阿拉伯木聚糖和β-葡聚糖的摩尔质量可能会影响摩擦响应,从而影响口腔加工(饮用)过程中口腔内的口腔加工。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/0a2f/11717023/5decbbf70cba/FSN3-13-e4699-g006.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验