McGhee Alexander J, McGhee Eric O, Famiglietti Jack E, Sawyer W Gregory
Department of Mechanical Engineering, University of Wisconsin-Madison, Madison, WI 53706 USA.
Department of Mechanical & Aerospace Engineering, Herbert Wertheim College of Engineering, University of Florida, Gainesville, FL 32601 USA.
In Vitro Model. 2022 Nov 7;1(4-5):309-321. doi: 10.1007/s44164-022-00037-6. eCollection 2022 Nov.
Advanced cell culture techniques such as 3D bioprinting and hydrogel-based cell embedding techniques harbor many new and exciting opportunities to study cells in environments that closely recapitulate in vivo conditions. Researchers often study these environments using fluorescence microscopy to visualize the protein association with objects such as cells within the 3D environment, yet quantification of concentration profiles in the microenvironment has remained elusive.
Demonstrate an assay that enables near real-time in situ biomarker detection and spatiotemporal quantification of biomarker concentration in 3D cell culture.
A distributed bead-based immuno-assay was used in 3D cell culture to continuously measure the time-dependent concentration gradient of various biomarkers by sequestering soluble target molecules and concentrating the fluorescence intensity of these tagged proteins. Timelapse confocal microscopy was used to measure the in situ fluorescence intensity profile and a calibration curve was separately generated. Application of a calibration transfer function to in situ data is used to quantify spatiotemporal concentration.
Example assays utilize an osteosarcoma spheroid as a case study for a quantitative single-plexed gel encapsulated assay, and a qualitative multi-plexed 3D-bioprinted assay. In both cases, a time-varying cytokine concentration gradient is measured. An estimation for the production rate of the IL-8 cytokine per second per osteosarcoma cell results from fitting an analytical function for continuous point source diffusion to the measured concentration gradient and reveals that spheroid production approaches nearly 0.18 fg/s of IL-8 after 18 h in culture.
Theoretical and experimental demonstration of bead-based immunoassays in diffusion-limited environments such as 3D cell culture is shown, and includes example measurements of various cytokines produced by an osteosarcoma spheroid. Proper calibration and use of this assay is exhaustively explored for the case of diffusion-limited Langmuir kinetics of a spherical adsorber.
先进的细胞培养技术,如3D生物打印和基于水凝胶的细胞包埋技术,为在紧密模拟体内条件的环境中研究细胞提供了许多新的、令人兴奋的机会。研究人员经常使用荧光显微镜研究这些环境,以可视化蛋白质与3D环境中细胞等物体的关联,但微环境中浓度分布的量化仍然难以实现。
展示一种能够在3D细胞培养中进行近实时原位生物标志物检测和生物标志物浓度时空量化的检测方法。
在3D细胞培养中使用基于微珠的分布式免疫测定法,通过隔离可溶性靶分子并浓缩这些标记蛋白的荧光强度,连续测量各种生物标志物随时间变化的浓度梯度。使用延时共聚焦显微镜测量原位荧光强度分布,并单独生成校准曲线。将校准传递函数应用于原位数据以量化时空浓度。
示例检测采用骨肉瘤球体作为定量单重凝胶包封检测和定性多重3D生物打印检测的案例研究。在这两种情况下,都测量了随时间变化的细胞因子浓度梯度。通过将连续点源扩散的分析函数拟合到测量的浓度梯度,得出每个骨肉瘤细胞每秒IL-8细胞因子的产生率估计值,结果表明,培养18小时后,球体产生的IL-8接近0.18 fg/s。
展示了基于微珠的免疫测定法在3D细胞培养等扩散受限环境中的理论和实验证明,包括骨肉瘤球体产生的各种细胞因子的示例测量。针对球形吸附剂的扩散受限朗缪尔动力学情况,对该检测方法的正确校准和使用进行了详尽探索。