Cen Chaode, Zhang Yong, Cao Yongfei, Hu Chaoran, Tang Lingli, Liu Chengwei, Wang Tao, Peng Wuxun
School of Clinical Medicine, The Guizhou Medical University, Guiyang 550025,China.
Department of Orthopedics, The Beijing Jishuitan Hospital Guizhou Hospital, Guiyang 550014, China.
ACS Biomater Sci Eng. 2025 Mar 10;11(3):1629-1645. doi: 10.1021/acsbiomaterials.4c01849. Epub 2025 Feb 13.
Although the Masquelet-induced membrane technique (MIMT) is now employed worldwide for bone defects, it often needs to be repeated and autogenous bone graft. This study aims to investigate the theoretical feasibility of replacing PMMA (poly(methyl methacrylate)) bone cement with PLLA (poly-l-lactic acid)/β -TCP (beta-tricalcium phosphate)/CS (calcium sulfate) scaffold for single-stage bone defect reconstruction, which evoke the induced membrane (IM) formation in the early stage and directly acts as the implantation in the second stage to reconstruct the bone defect. We constructed a corn-like PLLA/β -TCP/CS scaffold by the fused deposition 3D printing method. The characterizations of the scaffolds were investigated systematically. The P/T15/S15 scaffolds (the PLLA/β -TCP/CS scaffold with a 15% mass fraction of β-TCP and 15% mass fraction of CS) were filled into the large-segmental radius bone defects of white rabbits to evoke the formation of IMs. HE (hematoxylin-eosin) and VG (van gieson) staining, along with immunofluorescent staining, were performed to analyze the architecture and cellularity, the expression of BMP-2 (bone morphogenetic protein-2), VEGF (vascular endothelial growth factor), and TGF-β1 (transforming growth factor-β1) was evaluated by IHC (immunohistochemistry) and WB (western-blot) respectively, the ALP (alkaline phosphatase) and ARS (alizarin red S) staining was applied to assess the osteogenic potential. The corn-like PLLA/β-TCP/CS scaffolds with excellent physicochemical properties are successfully constructed using the fused deposition 3D printing technique. The HE and VG staining, along with immunofluorescent staining, suggested that the P/T15/S15 scaffold effectively mediated the formation of IM after 6 weeks of placement. A significant presence of M2 macrophages was observed in IM. The results of IHC and WB demonstrated that the IMs derived from the P/T15/S15 scaffolds exhibited elevated levels of VEGF, BMP-2, and TGF-β1, all of which promote the osteogenic differentiation of BMSCs. The results of cellular immunofluorescence, flow cytometry, and WB indicate that P/T15/S15 regulates the phenotypic polarization of M0 macrophages toward the M2 phenotype via the PI3K/AKT/β-Catenin pathway. These findings suggest that the biodegradable PLLA/β-TCP/CS scaffold may serve as a viable alternative to PMMA bone cement for single-stage bone defect reconstruction, owing to its unique ability to stimulate IM formation and promote the polarization of macrophages toward the M2 phenotype. This work presents innovative materials and strategies for the management of bone defects.
尽管Masquelet诱导膜技术(MIMT)目前在全球范围内被用于治疗骨缺损,但该技术常常需要重复进行且需自体骨移植。本研究旨在探讨用聚左旋乳酸(PLLA)/β -磷酸三钙(β-TCP)/硫酸钙(CS)支架替代聚甲基丙烯酸甲酯(PMMA)骨水泥用于单阶段骨缺损重建的理论可行性,该支架在早期可诱发诱导膜(IM)形成,并在第二阶段直接作为植入物用于重建骨缺损。我们通过熔融沉积3D打印方法构建了玉米状的PLLA/β -TCP/CS支架。系统地研究了该支架的特性。将P/T15/S15支架(β-TCP质量分数为15%、CS质量分数为15%的PLLA/β -TCP/CS支架)植入白兔的大段桡骨骨缺损处,以诱发IM形成。进行苏木精-伊红(HE)染色、维多利亚蓝(VG)染色以及免疫荧光染色,以分析组织结构和细胞组成,分别通过免疫组织化学(IHC)和蛋白质免疫印迹(WB)评估骨形态发生蛋白-2(BMP-2)、血管内皮生长因子(VEGF)和转化生长因子-β1(TGF-β1)的表达,应用碱性磷酸酶(ALP)和茜素红S(ARS)染色评估成骨潜力。利用熔融沉积3D打印技术成功构建了具有优异理化性质的玉米状PLLA/β -TCP/CS支架。HE染色、VG染色以及免疫荧光染色表明,P/T15/S15支架在植入6周后有效介导了IM的形成。在IM中观察到大量M2巨噬细胞。IHC和WB的结果表明,源自P/T15/S15支架的IM中VEGF、BMP-2和TGF-β1水平升高,所有这些均促进骨髓间充质干细胞(BMSCs)的成骨分化。细胞免疫荧光、流式细胞术和WB的结果表明,P/T15/S15通过PI3K/AKT/β-连环蛋白途径调节M0巨噬细胞向M2表型的表型极化。这些发现表明,可生物降解的PLLA/β -TCP/CS支架因其刺激IM形成以及促进巨噬细胞向M2表型极化的独特能力,可能成为PMMA骨水泥用于单阶段骨缺损重建的可行替代品。这项工作为骨缺损的治疗提供了创新材料和策略。