Fujii Yuto, Kawamura Akifumi, Morimoto Nobuyuki, Miyata Takashi
Department of Chemistry and Materials Engineering, Kansai University, 3-3-35, Yamate-cho, Suita, Osaka 564-8680, Japan.
Organization for Research and Development of Innovative Science and Technology, Kansai University, 3-3-35, Yamate-cho, Suita, Osaka 564-8680, Japan.
Langmuir. 2025 Mar 25;41(11):7732-7740. doi: 10.1021/acs.langmuir.5c00060. Epub 2025 Mar 11.
Associative phase separation (complex coacervation) in liquid-liquid phase separation (LLPS) involves the separation of multiple substances into concentrated and dilute phases by electrostatic interactions. Simple phase separation (simple coacervation) occurs when the hydrophilicity and hydrophobicity of a single molecule change dramatically in response to a specific stimulus. Simple coacervation arises from the lower critical solution temperature (LCST)- and upper critical solution temperature (UCST)-type phase separations in aqueous media containing temperature-responsive polymers. LCST- and UCST-type LLPSs induce droplet formation at temperatures above the LCST and below the UCST, respectively. Although there have been several studies on the UCST-type LLPS of temperature-responsive polymers in water, only a few temperature-responsive polymers that exhibit UCST-type LLPS in aqueous media with physiological ionic strength have been reported. In this study, we synthesized temperature-responsive zwitterionic polymers, exhibiting UCST-type LLPS in physiological ionic strength, by copolymerizing two types of zwitterionic monomers─sulfabetaine (SaB) having ammonium and sulfate groups and sulfobetaine (SB) having ammonium and sulfonate groups─in aqueous media with various ionic strengths. The resulting zwitterionic copolymers, P(SaB--SB)s, exhibited a cloud point (CP) characterized by a transition from turbidity to transparency as the temperature increased in a buffer with physiological ionic strength. The CP of P(SaB--SB) shifted from lower to higher temperatures as the SaB content increased. Microscopic observation showed that P(SaB--SB) underwent UCST-type LLPS to form coacervate droplets even in a buffer solution with physiological ionic strength at temperatures lower than the CP; however, the coacervates dissolved above the CP, unlike general UCST-type temperature-responsive polymers. The CPs of the P(SaB--SB)s under physiological ionic strength varied with the SaB content and ionic strength of the copolymerization medium. UCST-type LLPSs were induced by strong dipole-dipole interactions between SaB units at physiological ionic strength.
液-液相分离(LLPS)中的缔合相分离(复合凝聚)涉及多种物质通过静电相互作用分离成浓相和稀相。当单个分子的亲水性和疏水性响应特定刺激而发生显著变化时,会出现简单相分离(简单凝聚)。简单凝聚源于含有温度响应性聚合物的水性介质中的低临界溶液温度(LCST)型和高临界溶液温度(UCST)型相分离。LCST型和UCST型LLPS分别在高于LCST和低于UCST的温度下诱导液滴形成。尽管已经有几项关于温度响应性聚合物在水中的UCST型LLPS的研究,但在具有生理离子强度的水性介质中表现出UCST型LLPS的温度响应性聚合物却仅有少数被报道。在本研究中,我们通过在具有不同离子强度的水性介质中使两种两性离子单体——具有铵基和硫酸根基团的磺酸甜菜碱(SaB)以及具有铵基和磺酸根基团的磺基甜菜碱(SB)——共聚,合成了在生理离子强度下表现出UCST型LLPS的温度响应性两性离子聚合物。所得的两性离子共聚物P(SaB--SB)s在具有生理离子强度的缓冲液中随着温度升高呈现出从浑浊到透明的转变,其特征在于浊点(CP)。随着SaB含量增加,P(SaB--SB)的CP从较低温度移至较高温度。显微镜观察表明,即使在低于CP的温度下,P(SaB--SB)在具有生理离子强度的缓冲溶液中也会发生UCST型LLPS以形成凝聚层液滴;然而,与一般的UCST型温度响应性聚合物不同,凝聚层在高于CP时会溶解。在生理离子强度下,P(SaB--SB)s的CP随SaB含量和共聚介质的离子强度而变化。在生理离子强度下,UCST型LLPS是由SaB单元之间强烈的偶极-偶极相互作用诱导产生的。