Berenjian Aydin, Mahdinia Ehsan, Demirci Ali
Department of Chemical and Biological Engineering, Colorado State University, Fort Collins, CO, 80523, USA.
Department of Agricultural and Biological Engineering, 221 Agricultural Engineering Building, Pennsylvania State University, University Park, PA, 16802, USA.
Bioprocess Biosyst Eng. 2025 Jun;48(6):971-979. doi: 10.1007/s00449-025-03155-z. Epub 2025 Apr 5.
The health benefits of menaquinone-7 (MK-7) are well-established, and its production through fermentation techniques is widespread. Our team developed an innovative biofilm reactor utilizing Bacillus subtilis natto cells to foster biofilm growth on plastic composite supports to produce MK-7. The scalability of this biofilm reactor from a 2-L benchtop scale in our laboratory and its potential for commercial applications pose significant unresolved questions. Therefore, the current research was aimed to scale up the biofilm reactor from bench scale (2-L) to the pilot scale (30-L) bioreactor. Three strategies were evaluated to understand their impact on MK-7 biosynthesis during bioreactor volume expansion: volumetric oxygen mass transfer coefficient (ka), agitation power input per unit volume (P/V), and impeller tip velocity (V). While ka was successfully maintained during scaling, P/V and V varied and were assessed for their influence on MK-7 production. After investigating these methods, it was found that the volumetric oxygen mass transfer coefficient (ka) constant method proved to be the most effective one. The optimum MK-7 concentration achieved was 21.0 ± 1.0 mg/L, comparable to the highest MK-7 concentration of 20.6 ± 1.0 attained at the 2-L scale. This showcases the scalability of biofilm bioreactor technology and its promising potential for commercial production of MK-7. Furthermore, we explored the potential of fed-batch glucose addition to the base media in the biofilm reactor to enhance MK-7 concentration at the 30-L scale. Remarkably, results demonstrated that fed-batch strategy significantly increased MK-7 concentrations to 28.7 ± 0.3 mg/L, which made it almost 2.3-fold higher than levels produced in suspended-cell bioreactors. This finding highlights the potential of biofilm reactors as a promising replacement to the current static fermentation strategies for commercial production of MK-7.
甲萘醌-7(MK-7)对健康的益处已得到充分证实,并且通过发酵技术生产甲萘醌-7的情况很普遍。我们的团队开发了一种创新的生物膜反应器,利用纳豆芽孢杆菌细胞在塑料复合载体上促进生物膜生长,以生产MK-7。这种生物膜反应器从我们实验室的2升台式规模扩大规模以及其商业应用潜力存在重大未解决的问题。因此,当前的研究旨在将生物膜反应器从实验室规模(2升)扩大到中试规模(30升)生物反应器。评估了三种策略,以了解它们在生物反应器体积扩大过程中对MK-7生物合成的影响:体积氧传质系数(ka)、单位体积搅拌功率输入(P/V)和叶轮尖端速度(V)。虽然在扩大规模过程中成功维持了ka,但P/V和V有所变化,并评估了它们对MK-7生产的影响。研究这些方法后发现,体积氧传质系数(ka)恒定法被证明是最有效的方法。达到的最佳MK-7浓度为21.0±1.0毫克/升,与2升规模下达到的最高MK-7浓度20.6±1.0相当。这展示了生物膜生物反应器技术的可扩展性及其在MK-7商业生产中的广阔前景。此外,我们探索了在生物膜反应器的基础培养基中补料分批添加葡萄糖以提高30升规模下MK-7浓度的潜力。值得注意的是,结果表明补料分批策略显著提高了MK-7浓度至28.7±0.3毫克/升,这使其比悬浮细胞生物反应器中产生的水平高出近2.3倍。这一发现突出了生物膜反应器作为一种有前途的替代当前静态发酵策略用于MK-7商业生产的潜力。