Walter Yohan A, Durham Philip F, Hubbard Anne N, Burrell William E, Wu Hsinshun T
Department of Radiation Oncology, Willis Knighton Cancer Center, Shreveport, Louisiana, USA.
Department of Clinical Research, University of Jamestown, Fargo, North Dakota, USA.
J Appl Clin Med Phys. 2025 Jun;26(6):e70099. doi: 10.1002/acm2.70099. Epub 2025 Apr 9.
Linear accelerator (LINAC)-based single-isocenter multi-target (SIMT) treatment has streamlined the cranial stereotactic radiosurgery (SRS) workflow. Though efficient, SIMT delivery adds additional challenges that should be considered, including increased sensitivity to rotational errors for off-isocenter targets. Room-mounted imaging systems carry the advantage of allowing fast, low-dose imaging at nonzero couch angles, which may combat the effects of table walkout and residual rotational errors. Here, we performed a series of end-to-end tests to determine if these corrections correlate with a measurable difference in delivered dose and to assess the overall accuracy of SIMT delivery on our LINAC-based SRS platform.
Ten treatment plans of increasing complexity were created in the Elements 4.0 treatment planning system (TPS, Brainlab AG). Plans were delivered on an Elekta Versa HD LINAC (Elekta AB) with the ExacTrac (ETX) imaging system (Brainlab AG). A CT scan of a StereoPHAN with SRS MapCHECK (Sun Nuclear) was imported into the TPS. Measured targets were contoured on the detector plane. Plans used 4-15 treatment arcs and 4-6 couch angles. ETX was used for initial phantom positioning. Dose measurements were performed for each plan with and without ETX-guided corrections at all table angles.
Translational and rotational residual shifts were all submillimeter and ≤1.0 degrees, respectively, across all table angles. Using 3.0%/1.0 mm gamma criteria, all gamma pass rates (GPR) were either equal or improved when ETX shifts were executed, though the difference was not statistically significant (p = 0.076). However, using 2.0%/0.5 mm criteria, GPR improved significantly (p = 0.016) with ETX repositioning. The average GPR improvement was 4.5% ± 4.8%.
Results demonstrate that repositioning corrections at each table angle improve agreement between planned and delivered dose at the submillimeter level. The test treatment plans in this study may be used for assessment of end-to-end treatment delivery accuracy for complex LINAC-based stereotactic radiotherapy procedures.
基于直线加速器(LINAC)的单等中心多靶点(SIMT)治疗简化了颅立体定向放射外科(SRS)工作流程。尽管高效,但SIMT投照增加了一些应考虑的额外挑战,包括对非等中心靶点旋转误差的敏感性增加。安装在机房的成像系统具有在非零治疗床角度进行快速、低剂量成像的优势,这可能有助于对抗治疗床移出和残余旋转误差的影响。在此,我们进行了一系列端到端测试,以确定这些校正是否与所交付剂量的可测量差异相关,并评估基于LINAC的SRS平台上SIMT投照的整体准确性。
在Elements 4.0治疗计划系统(TPS,Brainlab AG)中创建了十个复杂度递增的治疗计划。计划在配备ExacTrac(ETX)成像系统(Brainlab AG)的Elekta Versa HD直线加速器(Elekta AB)上进行投照。将带有SRS MapCHECK(Sun Nuclear)的StereoPHAN的CT扫描图像导入TPS。在探测器平面上勾勒出测量靶点。计划使用4 - 15个治疗弧和4 - 6个治疗床角度。ETX用于初始体模定位。在所有治疗床角度下,对每个计划在有和没有ETX引导校正的情况下进行剂量测量。
在所有治疗床角度,平移和旋转残余位移分别均小于1毫米和≤1.0度。使用3.0%/1.0毫米伽马标准,当执行ETX位移时,所有伽马通过率(GPR)要么相等要么提高,尽管差异无统计学意义(p = 0.076)。然而,使用2.0%/0.5毫米标准时,ETX重新定位后GPR显著提高(p = 0.016)。GPR的平均提高幅度为4.5%±4.8%。
结果表明,在每个治疗床角度进行重新定位校正可提高亚毫米级计划剂量与所交付剂量之间的一致性。本研究中的测试治疗计划可用于评估基于LINAC的复杂立体定向放射治疗程序的端到端治疗投照准确性。