Vikranth Thirapurasundari, Dale Tina, Forsyth Nicholas R
School of Pharmacy and Bioengineering Guy Hilton Research Centre Keele University, Keele, UK.
J Tissue Eng Regen Med. 2024 Jul 8;2024:9940673. doi: 10.1155/2024/9940673. eCollection 2024.
Persistent air leaks caused by thoracic surgery, physical trauma, or spontaneous pneumothoraces are a cause of patient morbidity with need for extended chest tube durations and surgical interventions. Current treatment measures involve mechanical closure of air leaks in the compromised pleura. Organ and membrane decellularisation offers a broad range of biomimetic scaffolds of allogeneic and xenogeneic origins, exhibiting innate tissue-specific characteristics. We explored a physicochemical method for decellularising porcine pleural membranes (PPM) as potential tissue-engineered surrogates for lung tissue repair. Decellularised PPM (dPPM) was characterised with histology, quantitative assays, mechanical testing, and sterility evaluation. Cytotoxicity and recellularisation assays assessed biocompatibility of decellularised PPM (dPPM). Haematoxylin and Eosin (H&E) staining showed an evident reduction in stained nuclei in the dPPM, confirmed with nuclear staining and analysis ( < 0.0001). Sulphated glycosaminoglycans (sGAG) and collagen histology demonstrated minimal disruption to the gross structural assembly of core extracellular matrix (ECM) in dPPM. Confocal imaging demonstrated realignment of ECM fibres in dPPM against native control. Quantitative analysis defined a significant change in the angular distribution ( < 0.0001) and coherence ( < 0.001) of fibre orientations in dPPM versus native ECM. DNA quantification indicated ≥85% reduction in native nuclear dsDNA in dPPM ( < 0.01). Collagen and sGAG quantification indicated reductions of both ( < 0.01). dPPM displayed increased membrane thickness ( < 0.001). However, Young's modulus (459.67 ± 10.36 kPa) and ultimate tensile strength (4036.22 ± 155.1 kPa) of dPPM were comparable with those of native controls at (465.82 ± 10.51 kPa) and (3912.9 ± 247.42 kPa), respectively. cytotoxicity and scaffold biocompatibility assays demonstrated robust human mesothelial cell line (MeT-5A) attachment and viability. DNA quantification in reseeded dPPM with MeT-5A cells exhibited significant increase in DNA content at day 7 ( < 0.01) and day 15 ( < 0.0001) against unseeded dPPM. Here, we define a decellularisation protocol for porcine pleura that represents a step forward in their potential tissue engineering applications as bioscaffolds.
由胸外科手术、身体创伤或自发性气胸引起的持续性漏气是导致患者发病的原因,需要延长胸管留置时间并进行手术干预。目前的治疗措施包括机械封闭受损胸膜中的漏气。器官和膜脱细胞化提供了多种源自同种异体和异种的仿生支架,具有固有的组织特异性特征。我们探索了一种物理化学方法来使猪胸膜(PPM)脱细胞,作为肺组织修复的潜在组织工程替代物。对脱细胞猪胸膜(dPPM)进行了组织学、定量分析、力学测试和无菌评估。细胞毒性和再细胞化分析评估了脱细胞猪胸膜(dPPM)的生物相容性。苏木精和伊红(H&E)染色显示dPPM中染色细胞核明显减少,经细胞核染色和分析证实(P<0.0001)。硫酸化糖胺聚糖(sGAG)和胶原蛋白组织学显示dPPM中核心细胞外基质(ECM)的总体结构组装受到的破坏最小。共聚焦成像显示dPPM中的ECM纤维相对于天然对照重新排列。定量分析表明,与天然ECM相比,dPPM中纤维取向的角度分布(P<0.0001)和相干性(P<0.001)发生了显著变化。DNA定量表明dPPM中天然核双链DNA减少了≥85%(P<0.01)。胶原蛋白和sGAG定量表明两者均减少(P<0.01)。dPPM的膜厚度增加(P<0.001)。然而,dPPM的杨氏模量(459.67±10.36kPa)和极限拉伸强度(4036.22±155.1kPa)分别与天然对照的(465.82±10.51kPa)和(3912.9±247.42kPa)相当。细胞毒性和支架生物相容性分析表明人胸膜间皮细胞系(MeT-5A)具有强大的附着能力和活力。与未接种细胞的dPPM相比,接种MeT-5A细胞的dPPM在第7天(P<0.01)和第15天(P<0.0001)的DNA含量显著增加。在此,我们定义了一种猪胸膜脱细胞方案,这代表了其作为生物支架在潜在组织工程应用方面向前迈出的一步。