Weekes Angus, Wasielewska Joanna M, Pinto Nigel, Jenkins Jason, Patel Jatin, Li Zhiyong, Klein Travis J, Meinert Christoph
Centre for Biomedical Technologies, Queensland University of Technology (QUT), Brisbane, QLD, Australia.
School of Mechanical, Medical and Process Engineering, Faculty of Engineering, Queensland University of Technology (QUT), Brisbane, QLD, Australia.
J Tissue Eng Regen Med. 2024 Jun 12;2024:8707377. doi: 10.1155/2024/8707377. eCollection 2024.
Tissue engineering is a promising approach for the production of small-diameter vascular grafts; however, there are limited data directly comparing the suitability of applicable cell types for vessel biofabrication. Here, we investigated the potential of adult smooth muscle cells (SMCs), placental mesenchymal stem cells (MSCs), placental endothelial colony-forming cells (ECFCs), and a combination of MSCs and ECFCs on highly porous biocompatible poly(-caprolactone) (PCL) scaffolds produced via melt electrowriting (MEW) for the biofabrication of tissue-engineered vascular grafts (TEVGs). Cellular attachment, proliferation, and deposition of essential extracellular matrix (ECM) components were analysed over four weeks. TEVGs cultured with MSCs accumulated the highest levels of collagenous components within a dense ECM, while SMCs and the coculture were more sparsely populated, ascertained via histological and immunofluorescence imaging, and biochemical assessment. Scanning electron microscopy (SEM) enabled visualisation of morphological differences in cell attachment and growth, with MSCs and SMCs infiltrating and covering scaffolds completely within the 28-day culture period. Coverage and matrix deposition by ECFCs was limited. However, ECFCs lined the ECM formed by MSCs in coculture, visualised via immunostaining. Thus, of cells investigated, placental MSCs were identified as the preferred cell source for the fabrication of tissue-engineered constructs, exhibiting extensive population of porous polymer scaffolds and production of ECM components; with the inclusion of ECFCs for luminal endothelialisation, an encouraging outcome warranting further consideration in future studies. In combination, these findings represent a substantial step toward the development of the next generation of small-diameter vascular grafts in the management of cardiovascular disease.
组织工程是生产小口径血管移植物的一种很有前景的方法;然而,直接比较适用细胞类型对血管生物制造适用性的数据有限。在此,我们研究了成人平滑肌细胞(SMC)、胎盘间充质干细胞(MSC)、胎盘内皮集落形成细胞(ECFC)以及MSC和ECFC的组合,在通过熔体静电纺丝(MEW)制备的高度多孔生物相容性聚己内酯(PCL)支架上用于组织工程血管移植物(TEVG)生物制造的潜力。在四周内分析了细胞附着、增殖以及必需细胞外基质(ECM)成分的沉积情况。通过组织学和免疫荧光成像以及生化评估确定,用MSC培养的TEVG在致密的ECM中积累了最高水平的胶原成分,而SMC和共培养物中的细胞分布较为稀疏。扫描电子显微镜(SEM)能够观察到细胞附着和生长的形态差异,在28天的培养期内,MSC和SMC完全浸润并覆盖了支架。ECFC的覆盖和基质沉积有限。然而,通过免疫染色可以看到,在共培养中,ECFC排列在由MSC形成的ECM内衬上。因此,在所研究的细胞中,胎盘MSC被确定为制造组织工程构建体的首选细胞来源,它能广泛填充多孔聚合物支架并产生ECM成分;加入ECFC用于腔内内皮化,这一令人鼓舞的结果值得在未来研究中进一步考虑。综合起来,这些发现代表了在心血管疾病管理中开发下一代小口径血管移植物方面迈出的重要一步。