Suppr超能文献

使用多孔FeO-膨润土@壳聚糖纳米复合材料从不同水和废水中有效吸附刚果红偶氮染料:多变量优化

Effective adsorption of Congo red azo dye from different water and wastewater by using porous FeO-bentonite@chitosan nanocomposite: A multivariate optimization.

作者信息

Muhammad Haji, Tuzen Mustafa, Siddiqui Asma, Umar Abdul Rehman

机构信息

Tokat Gaziosmanpasa University, Faculty of Science and Arts, Chemistry Department, 60250 Tokat, Turkiye; Department of Chemistry, Federal Urdu University of Arts, Sciences and Technology, Karachi 75300, Pakistan.; Department of Chemistry, University of Karachi, Karachi, 75270, Pakistan.

Tokat Gaziosmanpasa University, Faculty of Science and Arts, Chemistry Department, 60250 Tokat, Turkiye.

出版信息

Int J Biol Macromol. 2025 May;310(Pt 3):143439. doi: 10.1016/j.ijbiomac.2025.143439. Epub 2025 Apr 23.

Abstract

In this study, a novel FeO-Chitosan@Bentonite (FeO-CS/Bent) nanocomposite was synthesized via a green and scalable co-precipitation method for the efficient adsorption of toxic azo dye Congo Red (CR) from wastewater. To analyze the physicochemical changes in nanocomposite before and after CR adsorption SEM-EDS, FTIR, XRD, BET, and VSM were employed. The results revealed that FeO-CS/Bent nanocomposite shows significantly enhanced surface area, pore volume, and adsorption capacity compared to pure FeO NPs, making it highly effective for environmental remediation. Despite its lower magnetization due to non-magnetic additives, it retains superparamagnetic properties that facilitate efficient magnetic separation in water treatment. Furthermore, the mesoporous FeO-CS/Bent nanocomposite can adsorb CR through electrostatic interactions, hydrogen bondings, and surface interaction under carefully optimized adsorption conditions (pH 5, adsorbent amount of 9 mg, and contact time of 25 min) via multivariate analyses. Subsequently, the adsorption process followed a pseudo-2nd order and Langmuir model, yielding a maximum adsorption capacity of 169 mg/g with 96 % removal efficiency, suggesting a monolayer chemisorption process on a relatively heterogeneous surface. The rate constant was determined to be 0.02 g/g-min suggesting a moderate adsorption rate. Thermodynamic analysis indicated adsorption of CR is spontaneous, exothermic, and feasible at moderate temperatures. Furthermore, FeO-CS/Bent exhibits outstanding removal efficiencies in recovery experiments, with 98.6-101.4 % recovery across drinking, tap, canal, and wastewater samples. The adsorbent demonstrated excellent reusability, maintaining over 70 % efficiency after 8th regeneration cycle. These findings establish that FeO-CS/Bent nanocomposite is found to be cost-effective environmentally friendly adsorbent for water treatment methods.

摘要

在本研究中,通过绿色且可扩展的共沉淀法合成了一种新型的FeO-壳聚糖@膨润土(FeO-CS/Bent)纳米复合材料,用于从废水中高效吸附有毒偶氮染料刚果红(CR)。采用扫描电子显微镜-能谱仪(SEM-EDS)、傅里叶变换红外光谱仪(FTIR)、X射线衍射仪(XRD)、比表面积分析仪(BET)和振动样品磁强计(VSM)来分析CR吸附前后纳米复合材料的物理化学变化。结果表明,与纯FeO纳米颗粒相比,FeO-CS/Bent纳米复合材料的表面积、孔体积和吸附容量显著增强,使其对环境修复非常有效。尽管由于非磁性添加剂导致其磁化强度较低,但它仍保留超顺磁性,便于在水处理中进行高效磁分离。此外,通过多变量分析,在精心优化的吸附条件(pH值为5、吸附剂用量为9mg、接触时间为25分钟)下,介孔FeO-CS/Bent纳米复合材料可通过静电相互作用、氢键和表面相互作用吸附CR。随后,吸附过程遵循准二级动力学和朗缪尔模型,最大吸附容量为169mg/g,去除效率为96%,表明在相对不均匀的表面上发生单层化学吸附过程。速率常数确定为0.02g/g·min,表明吸附速率适中。热力学分析表明,CR的吸附是自发的、放热的,并且在中等温度下是可行的。此外,FeO-CS/Bent在回收实验中表现出出色的去除效率,在饮用水、自来水、运河水和废水样品中的回收率为98.6-101.4%。该吸附剂表现出优异的可重复使用性,在第8次再生循环后仍保持70%以上的效率。这些研究结果表明,FeO-CS/Bent纳米复合材料是一种经济高效的环保型水处理吸附剂。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验