Daffalla Samah
Department of Environment and Agricultural Natural Resources, College of Agricultural and Food Sciences, King Faisal University, P.O. Box 400, Al-Ahsa 31982, Saudi Arabia.
Int J Mol Sci. 2025 Sep 1;26(17):8499. doi: 10.3390/ijms26178499.
This work presents the synthesis and application of magnetic FeO nanoparticles supported on baobab seed-derived biochar (FeO/BSB) for removing Congo red (CR) dye from aqueous solutions through an oxidative process. The biochar support offered a porous structure with a surface area of 85.6 m/g, facilitating uniform dispersion of FeO nanoparticles and efficient oxidative activity. Fourier-transform infrared (FT-IR) spectroscopy analysis confirmed surface fictionalization after FeO incorporation, while scanning electron microscopy (SEM) images revealed a rough, porous morphology with well-dispersed nanoparticles. Thermogravimetric analysis (TGA) demonstrated enhanced thermal stability, with FeO/BSB retaining ~40% of its mass at 600 °C compared to ~15-20% for raw baobab seeds. Batch experiments indicated that operational factors such as pH, nanoparticles dosage, and initial dye concentration significantly affected removal efficiency. Optimal CR removal (94.2%) was achieved at pH 4, attributed to stronger electrostatic interactions, whereas efficiency declined from 94.1% to 82.8% as the initial dye concentration increased from 10 to 80 mg/L. Kinetic studies showed that the pseudo-second-order model accurately described the oxidative degradation process. Reusability tests confirmed good stability, with removal efficiency decreasing only from 92.6% to 80.7% after four consecutive cycles. Overall, FeO/BSB proves to be a thermally stable, magnetically recoverable, and sustainable catalyst system for treating dye-contaminated wastewater.
这项工作展示了负载在猴面包树籽衍生生物炭(FeO/BSB)上的磁性FeO纳米颗粒的合成及其应用,该材料通过氧化过程从水溶液中去除刚果红(CR)染料。生物炭载体提供了表面积为85.6 m²/g的多孔结构,有利于FeO纳米颗粒的均匀分散和高效氧化活性。傅里叶变换红外(FT-IR)光谱分析证实了FeO掺入后的表面功能化,而扫描电子显微镜(SEM)图像显示出具有分散良好的纳米颗粒的粗糙多孔形态。热重分析(TGA)表明热稳定性增强,与未加工的猴面包树籽在600℃时保留约15%-20%的质量相比,FeO/BSB在该温度下保留约40%的质量。批量实验表明,pH值、纳米颗粒剂量和初始染料浓度等操作因素显著影响去除效率。在pH值为4时实现了最佳的CR去除率(94.2%),这归因于更强的静电相互作用,而随着初始染料浓度从10 mg/L增加到80 mg/L,去除效率从94.1%下降到82.8%。动力学研究表明,伪二级模型准确地描述了氧化降解过程。可重复使用性测试证实了良好的稳定性,连续四个循环后去除效率仅从92.6%降至80.7%。总体而言,FeO/BSB被证明是一种用于处理染料污染废水的热稳定、磁可回收且可持续的催化剂体系。