Direct In Situ Conversion of Both Lignin and Hemicellulose into Single Functional Biopolymers via Biomass Fractionation Process.

During the conventional biomass fractionation, the degradation and dissolution of lignin and hemicellulose result in a complex extract which remains very challenging for the thorough separation and purification of a wide variety of fractionated products, limiting their further utilization. Herein, we proposed a facile and efficient strategy for fractionating biomass and simultaneously in situ converting of both lignin and hemicellulose into single products using a formic acid-phloroglucinol system. The introduced phloroglucinol could react with lignin fragments and hemicellulose-derived products, and the generated intermediate product from hemicellulose can be further condensed with lignin fragments, finally forming single lignin-based functional biopolymers containing heterocyclic structures. Only small amounts of hemicellulosic derivatives, such as oligosaccharides, monosaccharides, furfural, and 5-HMF, were detected in the extracted solution, indicating a highly directional and effective in situ conversion process of hemicellulose. The constructed specific structures on fabric surfaces by using the chelation between lignin-based functional biopolymers and metal ions achieved the preparation of functional fabrics with stable hydrophobicity. The dynamic contact angle of water droplets on the surface of prepared fabric only decreased from 122° to 116.8° over 30 min. This work strategy provides an ideal route to maximize the utilization of both lignin and hemicellulose without involving complex separation and purification procedures. This strategy is the first demonstration of using the targeted fractionation system to achieve the simultaneous conversion of hemicellulose and lignin into single functional biopolymers directly from lignocellulosic biomass.