Khajehzadeh Mahasty, Geramifard Negar, Abbott Justin R, Wu Yupeng, Tirumala Kumara Shreya, Thai Teresa, Hernandez-Reynoso Ana G, Joshi-Imre Alexandra, Blum Kyle P, Miller Lee E, Pascual Juan M, Pancrazio Joseph J, Cogan Stuart F
Department of Bioengineering, The University of Texas at Dallas, Richardson, TX, United States of America.
Department of Materials Science and Engineering, The University of Texas at Dallas, Richardson, TX, United States of America.
J Neural Eng. 2025 Jun 3;22(3). doi: 10.1088/1741-2552/addb79.
Intracortical microelectrode arrays (MEAs) are implantable devices used for neural recording and stimulation. However, their long-term performance is often compromised due, at least in part, to glial scar formation, initiated by microglial migration and astrocyte activation following implantation. To address this issue, ultra-thin MEAs (UMEAs) have been proposed as an alternative due to their reduced cross-sectional area (CSA) and enhanced flexibility that minimizes the mechanical mismatch between brain tissue and the electrode. These properties are expected to mitigate the persistent foreign-body response associated with micromotion. However, unaided implantation of UMEAs can be challenging, as their high flexibility may increase the likelihood of buckling and curtail the precise penetration into the brain.We investigated flexible amorphous silicon carbide (a-SiC) probe designs with varying CSAs and lengths to identify geometries that enable unsupported implantation into the cerebral cortices of rat, pig, and macaques. The critical buckling force of the a-SiC probes was experimentally determined as a function of geometry and formally described via finite element modeling, which predicted buckling behavior. Additionally, the penetration behavior of a-SiC probes was evaluated by measuring force-displacement responses during insertion into cortical tissues across species.Our findings demonstrated that the penetration force and cortical dimpling depth were not significantly influenced by the range of probe geometries tested. However, we observed that penetration force and dimpling depth were significantly lower in rat cortices than in larger species. Importantly, probe geometries with a higher ratio (⩾2) of critical buckling force to penetration force exhibited a 100% success rate for unaided insertion.. This study provides a framework for designing and evaluating UMEA geometries to optimize unsupported implantation in both small and large animal brains.
皮层内微电极阵列(MEAs)是用于神经记录和刺激的可植入设备。然而,它们的长期性能常常受到损害,至少部分原因是植入后由小胶质细胞迁移和星形胶质细胞激活引发的胶质瘢痕形成。为了解决这个问题,超薄微电极阵列(UMEAs)因其减小的横截面积(CSA)和增强的柔韧性而被提议作为一种替代方案,这种柔韧性可使脑组织与电极之间的机械不匹配最小化。这些特性有望减轻与微运动相关的持续异物反应。然而,UMEAs的自主植入可能具有挑战性,因为它们的高柔韧性可能会增加弯曲的可能性,并减少精确穿透大脑的能力。我们研究了具有不同CSA和长度的柔性非晶碳化硅(a-SiC)探针设计,以确定能够在大鼠、猪和猕猴的大脑皮层中实现无支撑植入的几何形状。通过实验确定了a-SiC探针的临界屈曲力作为几何形状的函数,并通过有限元建模进行了正式描述,该模型预测了屈曲行为。此外,通过测量跨物种插入皮质组织过程中的力-位移响应来评估a-SiC探针的穿透行为。我们的研究结果表明,测试的探针几何形状范围对穿透力和皮质压痕深度没有显著影响。然而,我们观察到大鼠皮层中的穿透力和压痕深度明显低于较大物种。重要的是,临界屈曲力与穿透力之比更高(⩾2)的探针几何形状在自主插入时成功率为100%。这项研究为设计和评估UMEAs几何形状提供了一个框架,以优化在小型和大型动物大脑中的无支撑植入。