Vohra Maaz, Maiti Subhabrata, Shah Khushali K, Raju Lokitha, Nallaswamy Deepak, Eswaramoorthy Rajalakshmanan
Department of Prosthodontics and Implantology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, Tamil Nadu, India.
Department of Biochemistry, Center of Molecular Medicine and Diagnostics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, Tamil Nadu, India.
Dent Res J (Isfahan). 2025 May 22;22:19. doi: 10.4103/drj.drj_263_24. eCollection 2025.
Current challenges in bone grafting revolve around the limited availability of autografts and the complications associated with their use. Promising alternatives include osteoinductive substances stimulating stem cells to mature into bone-forming osteoblasts. However, existing products lack optimal characteristics of a bone graft. The study aimed to evaluate the impact of L-arginine treatment on hydroxyapatite (HA) derived from ovine bone and compare its surface and mechanical properties to that of the commercially available xenograft-Bio-Oss.
The research was structured as an investigation, wherein HA was formulated from ovine bone. The sintering process involved heating it to 360°C for 3 h and adding the amino acid L-arginine. Different tests were done which included scanning electron microscopy (SEM), X-ray diffractometry, Fourier-transform infrared spectroscopy (FTIR), and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The goal was to compare these results with a commercially available bone graft called BioOss, especially regarding their physical and chemical characteristics. Data were analyzed in SPSS software using one way ANOVA test, significant level at 0.05.
A bone graft made of HA and L-arginine displayed a complex and interconnected pore structure, indicating that the sintering process had a significant impact. SEM confirmed this. FTIR analysis identified peaks at 650-700 cm and 1000-1100 cm, confirming the presence of HA and L-arginine. X-ray Diffraction assessments also confirmed the existence of both substances in the sintered specimens, supporting their suitability for various biomedical applications.
The study presents a novel approach, deproteinizing a bone graft followed by sintering at 360°C with L-arginine. Physicochemical analyses confirmed desired mechanical attributes and surface characteristics. Further investigations are needed to evaluate cellular adherence, immunological response, and osteogenesis in relevant animal models.
目前骨移植面临的挑战主要围绕自体骨供应有限以及使用自体骨相关的并发症。有前景的替代方法包括使用骨诱导物质刺激干细胞成熟为成骨的成骨细胞。然而,现有产品缺乏骨移植的最佳特性。本研究旨在评估L-精氨酸处理对源自羊骨的羟基磷灰石(HA)的影响,并将其表面和力学性能与市售异种骨Bio-Oss进行比较。
本研究采用实验研究方法,其中HA由羊骨制备。烧结过程包括将其加热至360°C 3小时并添加氨基酸L-精氨酸。进行了不同的测试,包括扫描电子显微镜(SEM)、X射线衍射、傅里叶变换红外光谱(FTIR)和3-(4,5-二甲基噻唑-2-基)-2,5-二苯基四氮唑溴盐测定。目的是将这些结果与市售骨移植材料BioOss进行比较,特别是在其物理和化学特性方面。使用单因素方差分析在SPSS软件中分析数据,显著性水平为0.05。
由HA和L-精氨酸制成的骨移植材料呈现出复杂且相互连接的孔隙结构,表明烧结过程产生了显著影响。SEM证实了这一点。FTIR分析在650 - 700 cm和1000 - 1100 cm处识别出峰,证实了HA和L-精氨酸的存在。X射线衍射评估也证实了烧结标本中两种物质的存在,支持它们适用于各种生物医学应用。
本研究提出了一种新方法,即对骨移植材料进行脱蛋白处理,然后在360°C下与L-精氨酸一起烧结。物理化学分析证实了所需的力学属性和表面特性。需要进一步研究以评估相关动物模型中的细胞黏附、免疫反应和成骨作用。