Biomass-derived macroporous carbon-tin oxide composites as stable and high-capacity anodes for lithium-ion and sodium-ion batteries: experimental study and GFN1-xTB calculations.

To produce high-performance anode materials for lithium/sodium batteries sustainable strategies is still one of the most essential tasks in battery research. A biomass-based carbon-tin oxide composite (BC/SnO) is prepared through pyrolysis of birch tree waste using phosphoric acid as an activator and its electrochemical performance as a sustainable anode material in lithium-ion batteries (LIBs) and sodium-ion batteries (NIBs) is tested. The physicochemical characterization results proved that SnO has a remarkable impact on BC/SnO porosity, morphology, and physicochemical features. Due to these favorable properties, the BC/SnO anode exhibited far better performance for LIBs and NIBs than bare carbon (BC). Against Li metal, the BC/SnO anode delivered a specific capacity of 319 mA h g while BC delivered only 93.2 mA h g (at 1C) at the end of 120 cycles. The BC/SnO composite showed excellent rate performances at different current densities, exhibiting a capacity of 453 mA h g at the end of 120 cycles. Upon testing against sodium metal, the BC/SnO composite exhibited better cycling stability than BC (233 mA h g compared with 165 mA h g) at 100 mA g for 120 cycles. A theoretical investigation of the interactions between BC and SnO was performed using the semi-empirical GFN1-xTB method. The stability of the mixed system at high temperatures was confirmed using molecular dynamic simulations. Finally, we analyzed the electronic properties of the BC/SnO composite and drew conclusions about the electrical conductivity. Therefore, our research strategy helps to produce sustainable high-specific capacity anode materials from biomass resources for building cost-effective metal-ion batteries.