Suppr超能文献

基于机器学习的紫外调制锑掺杂二氧化锡传感器在室温下实时气体识别

Real-Time Gas Identification at Room Temperature Using UV-Modulated Sb-Doped SnO Sensors via Machine Learning.

作者信息

Lin Yan-Fong, Chi Yu-Chen, Tseng Sheng-Hong, Wang Te-Fu, Lin Ying-Tsung, Yang Min-Ta, Lin Chih-Hao, Liao Su-Yu, Huang Chun-Ying

机构信息

Photonics Group, Department of Engineering Science and Ocean Engineering, National Taiwan University, Taipei 10660, Taiwan.

Department of Applied Materials and Optoelectronic Engineering, National Chi Nan University, Nantou 54561, Taiwan.

出版信息

ACS Sens. 2025 Jul 25;10(7):5129-5139. doi: 10.1021/acssensors.5c01183. Epub 2025 Jul 2.

Abstract

This study presents a novel approach for real-time gas identification at room temperature. We use UV-modulated Sb-doped SnO sensors combined with machine learning. Our method exclusively employs the gas response () as the sole metric. This eliminates the need for time-dependent parameters such as response and recovery times. By modulating the UV light intensity at five distinct levels (5, 10, 15, 20, and 30 mW/cm), we generate a five-dimensional optical fingerprint. This fingerprint captures subtle variations in sensor response under different illumination conditions. Gas discrimination was evaluated for both oxidizing gases (O and NO) and reducing gases (NH and H). Our machine learning results show that Support Vector Machine (SVM) and K-Nearest Neighbors (KNN) achieve nearly 100% accuracy when four UV intensity levels are used. Using as the sole input metric allows for instantaneous response detection, which is essential for real-time gas identification. This approach addresses the limitations of conventional thermally activated sensors that require multiple parameters and paves the way for the development of rapid-response monitoring systems.

摘要

本研究提出了一种在室温下进行实时气体识别的新方法。我们使用紫外线调制的锑掺杂氧化锡传感器并结合机器学习。我们的方法仅采用气体响应()作为唯一指标。这消除了对诸如响应时间和恢复时间等与时间相关参数的需求。通过在五个不同水平(5、10、15、20和30 mW/cm)调制紫外线光强度,我们生成了一个五维光学指纹。该指纹捕获了不同光照条件下传感器响应的细微变化。对氧化性气体(O和NO)和还原性气体(NH和H)进行了气体鉴别评估。我们的机器学习结果表明,当使用四个紫外线强度水平时,支持向量机(SVM)和K近邻算法(KNN)的准确率接近100%。将作为唯一输入指标可实现即时响应检测,这对于实时气体识别至关重要。这种方法解决了传统热激活传感器需要多个参数的局限性,并为快速响应监测系统的开发铺平了道路。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验