Jamallivani Amirhossein, Behnam Hamid, Tavakkoli Jahangir
Department of Biomedical Engineering, Iran University of Science and Technology, Tehran, Iran.
Department of Physics, Toronto Metropolitan University, Toronto, ON, Canada.
PLoS One. 2025 Jul 2;20(7):e0324801. doi: 10.1371/journal.pone.0324801. eCollection 2025.
High-Intensity Focused Ultrasound (HIFU) is a non-invasive therapeutic modality that uses high-energy acoustic waves to thermally coagulate tissue at the focal region. The Twinkling Artifact (TA) is a color Doppler artifact caused by the acoustic radiation force and the consequent tissue vibration during Doppler imaging. This paper aims to employ TA for real-time detection and monitoring of HIFU-induced lesions. A dataset gathered in a previous study concerning ex vivo porcine tissue samples was used, in which the real-time backscattered radiofrequency signals were acquired before, during, and after HIFU treatment. To investigate the presence of TA in Doppler images, the amplitude of each pixel is considered in the sequence of frames as time-series or slow-time signals. It is shown that the main frequency of slow-time signals represents the Doppler frequency shift. Doppler images were constructed using the maximum frequency from every 10-sample slow-time signal. By constructing Doppler images, the frequency shifts within tissue during HIFU treatment were visually and analytically assessed. Our frequency analysis of RF data confirmed the occurrence of TA during HIFU exposure. Furthermore, a novel method was developed for lesion formation monitoring, with less than a 5% error rate in depth and width measurements for depicting coagulated tissue dimensions.
高强度聚焦超声(HIFU)是一种非侵入性治疗方式,它利用高能声波在焦点区域对组织进行热凝固。闪烁伪像(TA)是一种彩色多普勒伪像,由多普勒成像期间的声辐射力和随之而来的组织振动引起。本文旨在利用TA对HIFU诱导的损伤进行实时检测和监测。使用了先前一项关于离体猪组织样本的研究中收集的数据集,其中在HIFU治疗前、治疗期间和治疗后采集了实时反向散射射频信号。为了研究TA在多普勒图像中的存在情况,将每一帧中每个像素的幅度作为时间序列或慢时间信号来考虑。结果表明,慢时间信号的主频代表多普勒频移。利用每10个样本慢时间信号中的最大频率构建多普勒图像。通过构建多普勒图像,对HIFU治疗期间组织内的频移进行了视觉和分析评估。我们对射频数据的频率分析证实了HIFU暴露期间TA的出现。此外,还开发了一种用于损伤形成监测的新方法,在描绘凝固组织尺寸的深度和宽度测量中,误差率小于5%。