Palomba Mariano, Carotenuto Gianfranco, Raucci Maria Grazia, Ruotolo Antonio, Longo Angela
Institute for Polymers, Composites, and Biomaterials, National Research Council, SS Napoli/Portici, 80125 Napoli, Italy.
Department of Engineering, College of Charleston, Charleston, SC 29424, USA.
Materials (Basel). 2025 Jun 25;18(13):3003. doi: 10.3390/ma18133003.
Gold nanoparticles (AuNPs) anchored on graphene oxide (GO) have had a significant interest for their unique optical, electrical, and catalytic properties. This study presents an eco-friendly and sustainable synthesis of AuNPs on GO sheets using L-ascorbic acid (L-aa) as a green reducing agent and polyvinylpyrrolidone (PVP) as a stabilizer. The effect of reductant concentration on nanoparticle morphology was systematically investigated using UV-Visible spectroscopy and transmission electron microscopy (TEM). Results indicate the formation of AuNPs anchored on GO sheets and that an increase in the L-aa amount leads to both an increase in nanoparticle size and a morphological transition from spherical to irregular structures. The simultaneous nucleation and growth processes result in the formation of multiple families of nanostructures, as confirmed by TEM analysis, which reveals two distinct size distributions. At higher L-aa concentrations, the nanoparticles shape evolves into irregular morphologies due to selective growth along a preferential facet. This approach not only enables precise control over AuNP size and shape but also aligns with green chemistry principles, making it a promising route for applications in plasmonics, sensors, and photothermal therapy.
锚定在氧化石墨烯(GO)上的金纳米颗粒(AuNPs)因其独特的光学、电学和催化性能而备受关注。本研究提出了一种以L-抗坏血酸(L-aa)作为绿色还原剂、聚乙烯吡咯烷酮(PVP)作为稳定剂,在氧化石墨烯片上进行生态友好且可持续的金纳米颗粒合成方法。使用紫外可见光谱和透射电子显微镜(TEM)系统地研究了还原剂浓度对纳米颗粒形态的影响。结果表明形成了锚定在氧化石墨烯片上的金纳米颗粒,并且L-aa量的增加导致纳米颗粒尺寸增大以及形态从球形转变为不规则结构。如TEM分析所证实的,同时发生的成核和生长过程导致形成多个纳米结构家族,揭示出两种不同的尺寸分布。在较高的L-aa浓度下,由于沿优先晶面的选择性生长,纳米颗粒形状演变为不规则形态。这种方法不仅能够精确控制金纳米颗粒的尺寸和形状,而且符合绿色化学原则,使其成为等离子体学、传感器和光热疗法应用的一条有前景的途径。