Shi Yanhu, Liu Shang, Zhao Yi, Zhang Heng, Hou Yifan, Deng Xiaoyong, Xie Yijun
Institute of Nanochemistry and Nanobiology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, 200444, China.
Biomedical Polymers Laboratory, and Jiangsu Key Laboratory of Advanced Functional Polymers, College of Chemistry, Chemical Engineering and Materials Science, State Key Laboratory of Radiation Medicine and Protection, Soochow University, Suzhou, 215123, China.
Adv Mater. 2025 Jul 21:e08192. doi: 10.1002/adma.202508192.
Solar-driven interfacial evaporation technology has emerged as a promising solution for seawater desalination, offering a potential remedy to the global water crisis. However, its widespread application is hindered by reduced performance in high-salinity brines and limited evaporator lifetimes. Inspired by natural melanins, amino acid-doped poly(norepinephrine) nanoparticles (PNE NPs) are developed as photothermal materials, encapsulated in a cellulose-based aerogel to form a 3D bilayer porous structure with salt ion enrichment effects. The interaction between the enriched ions in the aerogel weakens the hydrogen bonds between water molecules, reducing evaporation enthalpy and enhancing evaporation rates. Under one sun illumination, the evaporator achieves an evaporation rate of 4.06 kg m h in high-concentration saline, surpassing the rate in pure water (3.51 kg m h), with the rate increasing further as salt concentration rises. Notably, even the blank control group without photothermal materials shows an evaporation rate of 1.70 kg m h, demonstrating the aerogel's strong intrinsic evaporation performance. The aerogel maintains its performance over five months of immersion in water without significant degradation. This low-cost, cellulose-based aerogel offers a promising solution to the issue of evaporation performance degradation in high-salinity brines, making large-scale solar desalination a feasible and effective option.
太阳能驱动的界面蒸发技术已成为海水淡化的一种有前景的解决方案,为全球水危机提供了一种潜在的补救措施。然而,其广泛应用受到高盐度盐水中性能下降和蒸发器寿命有限的阻碍。受天然黑色素的启发,开发了氨基酸掺杂的聚(去甲肾上腺素)纳米颗粒(PNE NPs)作为光热材料,封装在纤维素基气凝胶中形成具有盐离子富集效应的三维双层多孔结构。气凝胶中富集离子之间的相互作用削弱了水分子之间的氢键,降低了蒸发焓并提高了蒸发速率。在一个太阳光照下,蒸发器在高浓度盐水中的蒸发速率达到4.06 kg m⁻² h⁻¹,超过了纯水中的速率(3.51 kg m⁻² h⁻¹),并且随着盐浓度的增加速率进一步提高。值得注意的是,即使是没有光热材料的空白对照组也显示出1.70 kg m⁻² h⁻¹的蒸发速率,表明气凝胶具有很强的固有蒸发性能。该气凝胶在水中浸泡五个月仍保持其性能,没有明显降解。这种低成本的纤维素基气凝胶为高盐度盐水中蒸发性能下降的问题提供了一种有前景的解决方案,使大规模太阳能淡化成为一种可行且有效的选择。