Reflectometric method for measuring residual oxides in through-silicon vias for 3D chip integration.

A significant aspect of fabricating 3D chip architectures is ensuring proper contact between the different layers of the chip, which often requires removing the underside of isolation layers before filling vias with conductive material. Currently, scanning electron microscopy is the established method for investigating such structures. In this paper, we propose a rapid, non-destructive optical analysis technique for the simultaneous measurement of through-silicon vias (TSV) depths, silicon wafer thickness, and residual oxide thickness. The proposed method utilizes Fourier peak shift analysis (FPSA) of reflectance measurements in the near-infrared (1200 nm-2200 nm) spectral regions. The application of FPSA to representative samples taken from a commercial TSV integration process for MEMS and CMOS fabrication demonstrated good agreement with reference scanning electron microscopy measurements, confirming the feasibility of the method for in-line and in-situ metrology. The results indicate that FPSA has great potential for real-time process monitoring and control during 3D chip manufacturing.