Roy Debojyoti, Yadav Kishan K, Dasgupta Jyotishman
Department of Chemical Sciences, Tata Institute of Fundamental Research, 1, Homi Bhabha Road, Navy Nagar, Colaba, Mumbai, 400005, India.
Acc Chem Res. 2025 Jul 31. doi: 10.1021/acs.accounts.5c00342.
ConspectusVisible-light-mediated photoredox catalysis, rejuvenated by David MacMillan in 2008 following the early work by Richard Kellogg and Shunichi Fukuzumi on photosensitized reactions, has been used as an efficient strategy to carry out complex organic synthesis under mild reaction conditions. The main motivation for using visible-light during selective photoredox transformations is to minimize the use of high-energy and chemically disruptive UV-photons, thereby mimicking natural photosynthesis. Transition metal-based photosensitizers with substantial visible-light absorption cross sections and long triplet excited-state lifetimes have been successfully used to efficiently drive such light-mediated chemical transformations in organic solvents. An alternate approach for executing visible-light-mediated photocatalysis uses the idea of establishing stable donor-acceptor charge-transfer (CT) interactions, as demonstrated in 2013 by Melchiorre and co-workers, who utilized CT-based catalysis to carry out stereoselective C-C coupling reactions in bulk organic solvents. In general, most contemporary photocatalytic organic transformations in bulk solvents proceed via diffusion-limited processes, typically using triplet states. However, if the excitation energy transfer (EnT) and/or electron transfer (ET) are not temporally ordered with optimal timescales for reactive collisions driven by diffusion, photon-energy utilization will be low, due to which high-power light sources are usually applied. Therefore, engineering preorganized donor-acceptor interfaces capable of ultrafast photochemistry for catalytic transformation in water would revolutionize the photoredox paradigm while mimicking natural enzymes.This Account focuses on our efforts since 2014 to develop visible-light-driven host-guest CT state-mediated photoredox catalysis within water-soluble supramolecular nanocages. The conceptual framework relies on using an electron-deficient, cationic supramolecular cavity to establish CT interactions with redox-complementary, electron-rich, and water-insoluble organic guest molecules. With self-assembly playing a dominant role in guest preorganization inside cationic PdL nanocavity, we successfully demonstrated visible-light-induced O-H, N-H, and C-H bond photoactivation along with rare examples of photocatalytic C-C coupling reactions at room temperature using low-power visible-light sources. The design principles for nanocage-based catalytic cycles have relied on the strategic use of complementary donor-acceptor redox pairs, excited-state host-guest charge-transfer dynamics, confinement geometry, and the water-assisted proton-coupled electron transfer (PCET) reaction. Here, we systematically recount our conceptual framework, which emphasizes the usage of photoexcited singlet CT states in order to discover a novel bond-activation paradigm via preorganization inside water-soluble nanocages. We describe the use of broadband femtosecond transient absorption (fs-TA) spectroscopy to clock ultrafast solvation dynamics of water around the nanocage along with watching O-H, N-H, and C-H bond-breaking steps, enabled by coupling the electron transfer and proton transfer steps which are albeit temporally segregated. The significance of identifying transient absorption signatures of the photogenerated cage-confined radical species and their respective lifetimes is put in the context of driving selective oxidation reactions at sp-, sp-, and sp-hybridized C-H bonds; highlighting the first selective toluene-to-benzaldehyde transformation at room temperature. We further show that our methodology of host-guest CT-mediated photochemistry is general enough since it allows sp-C-H bond functionalization inside an all-organic cationic supramolecular cavity. Finally, we delve into the necessity of modulating the confining geometry, electronics, and volume of such nanocages to completely alter product distributions, which will be a useful handle for all synthetic organic chemists.
综述
可见光介导的光氧化还原催化在2008年由大卫·麦克米伦复兴,此前理查德·凯洛格和顺一福住曾开展过关于光敏反应的早期工作,该催化已被用作在温和反应条件下进行复杂有机合成的有效策略。在选择性光氧化还原转化过程中使用可见光的主要动机是尽量减少高能且具有化学破坏性的紫外光子的使用,从而模仿自然光合作用。具有较大可见光吸收截面和长三线态激发态寿命的过渡金属基光敏剂已成功用于在有机溶剂中有效驱动此类光介导的化学转化。执行可见光介导的光催化的另一种方法利用了建立稳定供体 - 受体电荷转移(CT)相互作用的理念,正如梅尔基奥雷及其同事在2013年所展示的那样,他们利用基于CT的催化在本体有机溶剂中进行立体选择性C - C偶联反应。一般来说,大多数当代本体溶剂中的光催化有机转化是通过扩散限制过程进行的,通常利用三线态。然而,如果激发能量转移(EnT)和/或电子转移(ET)在由扩散驱动的反应性碰撞的最佳时间尺度上没有时间顺序,光子能量利用率将会很低,因此通常会应用高功率光源。因此,设计能够在水中进行超快光化学催化转化的预组织供体 - 受体界面,将在模仿天然酶的同时彻底改变光氧化还原模式。
本综述重点介绍了我们自2014年以来在水溶性超分子纳米笼内开发可见光驱动的主客体CT态介导的光氧化还原催化方面所做的努力。概念框架依赖于使用缺电子的阳离子超分子腔与氧化还原互补、富电子且水不溶性的有机客体分子建立CT相互作用。由于自组装在阳离子PdL纳米腔内客体预组织中起主导作用,我们成功展示了可见光诱导的O - H、N - H和C - H键的光活化,以及在室温下使用低功率可见光源进行光催化C - C偶联反应的罕见实例。基于纳米笼的催化循环的设计原则依赖于互补供体 - 受体氧化还原对的策略性使用、激发态主客体电荷转移动力学、限制几何结构以及水辅助的质子耦合电子转移(PCET)反应。在此,我们系统地阐述了我们的概念框架,该框架强调光激发单线态CT态的使用,以便通过在水溶性纳米笼内的预组织发现一种新颖的键活化模式。我们描述了使用宽带飞秒瞬态吸收(fs - TA)光谱来记录纳米笼周围水的超快溶剂化动力学,同时观察O - H、N - H和C - H键断裂步骤,这是通过耦合尽管在时间上分离的电子转移和质子转移步骤实现的。识别光生笼内受限自由基物种的瞬态吸收特征及其各自寿命的重要性,体现在驱动sp - 、sp - 和sp - 杂化C - H键的选择性氧化反应中;突出了在室温下首次实现的甲苯到苯甲醛的选择性转化。我们进一步表明,我们的主客体CT介导的光化学方法具有足够的通用性,因为它允许在全有机阳离子超分子腔内进行sp - C - H键功能化。最后,我们深入探讨了调节此类纳米笼的限制几何结构、电子性质和体积以完全改变产物分布的必要性,这将为所有有机合成化学家提供一个有用的手段。