Suppr超能文献

人骨髓源干细胞在3D打印生物活性玻璃支架上的分化

Human bone marrow derived stem cell differentiation on 3D printed bioactive glass scaffolds.

作者信息

Li Siwei, Mohammed Ali A, Nommeots-Nomm Amy, Shi Xiaomeng, Barrak Fadi, Heyraud Agathe, Jones Julian R

机构信息

Department of Materials, Imperial College London, London, UK.

VSS Academy Training & Education Ltd, London, UK.

出版信息

J Mater Sci Mater Med. 2025 Aug 27;36(1):69. doi: 10.1007/s10856-025-06918-y.

Abstract

Bioactive glass particles have previously been found to stimulate new bone growth in vivo and have a long clinical track record. The effect of bioactive glasses on human bone marrow derived stromal cells (hBMSCs) has not been clearly ascertained previously. Recently, 3D printed scaffolds of the ICIE16 glass composition (49.46 mol% SiO, 36.6 mol% CaO, 6.6 mol% NaO, 6.6 mol% KO, 1.07 mol% PO) were found to produce high quality bone ingrowth in vivo in a rabbit model. This composition was chosen because it can be sintered into scaffolds without crystallisation. Here, we cultured hBMSCs on the 3D printed ICIE16 scaffolds to determine whether the scaffolds can support cell growth and osteogenic differentiation in vitro, with and without the presence of osteogenic supplements. This was compared to a control of culture media containing dissolution products of the bioactive glass scaffold. Our hypothesis was that the cells cultured on the scaffolds would undergo more osteogenic differentiation than cells cultured in media containing only the dissolution ions of the scaffolds, even without osteogenic supplements. hBMSCs cultured on ICIE16 scaffolds significantly increased expression of osteogenic differentiation and matrix formation markers, including Runx 2, Col1a1, Osteopontin, Osteocalcin and Alkaline Phosphatase, in comparison to monolayer cultures in basal conditions with bioactive glass dissolution products, at all time points up to 6 weeks. Six weeks was chosen as it is the time scale for bone fracture healing. The presence of osteogenic supplements appeared to have synergetic effects with 3D scaffolds, especially during early stages of osteogenic differentiation (week 2 and 4). By week 6, there was no significant difference in the expression of osteogenic markers by hBMSCs cultured on ICE16 scaffolds with and without osteogenic supplements. These findings support our hypothesis and highlight that the 3D structure and the dissolution of ICIE16 bioactive glass ionic products both independently influence osteogenic differentiation of hBMSCs.

摘要

生物活性玻璃颗粒此前已被发现可在体内刺激新骨生长,并且有很长的临床应用记录。生物活性玻璃对人骨髓来源的基质细胞(hBMSCs)的影响此前尚未明确确定。最近,发现ICIE16玻璃成分(49.46摩尔%SiO、36.6摩尔%CaO、6.6摩尔%NaO、6.6摩尔%KO、1.07摩尔%PO)的3D打印支架在兔模型体内能产生高质量的骨向内生长。选择该成分是因为它可以烧结成支架而不结晶。在此,我们将hBMSCs培养在3D打印的ICIE16支架上,以确定该支架在有无成骨补充剂的情况下,能否在体外支持细胞生长和成骨分化。将其与含有生物活性玻璃支架溶解产物的培养基对照进行比较。我们的假设是,即使没有成骨补充剂,在支架上培养的细胞比仅在含有支架溶解离子的培养基中培养的细胞会经历更多的成骨分化。与在含有生物活性玻璃溶解产物的基础条件下单层培养相比,在ICIE16支架上培养的hBMSCs在长达6周的所有时间点,成骨分化和基质形成标志物(包括Runx 2、Col1a1、骨桥蛋白、骨钙素和碱性磷酸酶)的表达均显著增加。选择6周是因为这是骨折愈合的时间尺度。成骨补充剂的存在似乎与3D支架有协同作用,尤其是在成骨分化的早期阶段(第2周和第4周)。到第6周时,在有无成骨补充剂的情况下,在ICIE16支架上培养的hBMSCs成骨标志物的表达没有显著差异。这些发现支持了我们的假设,并突出表明ICIE16生物活性玻璃离子产物的3D结构和溶解都独立影响hBMSCs的成骨分化。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/7979/12391171/e79665175fb8/10856_2025_6918_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验