Suppr超能文献

通过电化学方法测定的固定化葡萄糖氧化酶的传质和反应动力学参数。

Mass transport and reaction kinetic parameters determined electrochemically for immobilized glucose oxidase.

作者信息

Castner J F, Wingard L B

出版信息

Biochemistry. 1984 May 8;23(10):2203-10. doi: 10.1021/bi00305a016.

Abstract

Mass-transfer resistances often have pronounced effects on the overall reaction rates of enzymes immobilized at interfaces or in polymeric matrices. In the present work glucose oxidase was immobilized on the surface of a platinum disk electrode by one of three attachment techniques: silane-glutaraldehyde, allylamine-glutaraldehyde, and albumin-glutaraldehyde. In one group of studies the electrodes were rotated, and methods were employed to determine the diffusion and shielding coefficients for transport of a model electroactive compound, i.e., potassium ferrocyanide, through the enzyme matrix. A model electrochemically active compound was used because glucose exhibits a very slow rate of electron transfer at a platinum surface. The diffusion coefficient for ferrocyanide was reduced 7% by the silane-enzyme and 25% by the allylamine-enzyme matrices. In a second group of studies the electrodes were held stationary. Marked internal diffusional resistance was noted for the albumin-glutaraldehyde-enzyme matrix. The calculated flux of ferrocyanide was decreased by a factor of 2000-8500 for transport through albumin-enzyme matrices 0.21-0.063 cm thick, as compared to transport through free solution. In a third group of studies the rotating enzyme-matrix electrode was utilized in determining apparent values of the Michaelis constant for glucose. The velocity of the reaction was determined by amperometric measurement of the concentration of hydrogen peroxide reaching the ring electrode. The results, determined from Eadie-Hofstee type plots of reaction current and substrate concentration, gave values between 12 and 36 mM for the three methods of immobilization.(ABSTRACT TRUNCATED AT 250 WORDS)

摘要

传质阻力通常对固定在界面或聚合物基质中的酶的整体反应速率有显著影响。在本研究中,葡萄糖氧化酶通过三种固定技术之一固定在铂盘电极表面:硅烷 - 戊二醛、烯丙胺 - 戊二醛和白蛋白 - 戊二醛。在一组研究中,电极旋转,并采用方法测定模型电活性化合物(即亚铁氰化钾)通过酶基质的扩散系数和屏蔽系数。使用模型电化学活性化合物是因为葡萄糖在铂表面的电子转移速率非常慢。亚铁氰化钾的扩散系数在硅烷 - 酶基质中降低了7%,在烯丙胺 - 酶基质中降低了25%。在第二组研究中,电极保持固定。白蛋白 - 戊二醛 - 酶基质存在明显的内部扩散阻力。与通过自由溶液传输相比,对于厚度为0.21 - 0.063 cm的白蛋白 - 酶基质,计算得出的亚铁氰化钾通量降低了2000 - 8500倍。在第三组研究中,旋转的酶 - 基质电极用于测定葡萄糖的米氏常数的表观值。反应速度通过对到达环形电极的过氧化氢浓度进行安培测量来确定。根据反应电流和底物浓度的伊迪 - 霍夫斯泰类型图确定的结果,三种固定方法得到的值在12至36 mM之间。(摘要截断于250字)

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验