Suppr超能文献

使用含镉硬焊料的钎焊工中镉的环境因素与吸收情况。

Environmental factors and uptake of cadmium among brazers using cadmium-containing hard solders.

作者信息

Lundberg I, Sjögren B, Hallne U, Hedström L, Holgersson M

出版信息

Am Ind Hyg Assoc J. 1984 Jun;45(6):353-9. doi: 10.1080/15298668491399938.

Abstract

The influence of different work factors on the uptake of cadmium has been studied in 102 brazers working at least 10% of their work day with cadmium-containing hard solders. The blood concentrations of cadmium varied between less than 1 and 113 micrograms/L (less than 9 and 1010 nmol/L). Blood cadmium concentrations were below 10 micrograms/L (89 nmol/L) in 71 brazers and 31 brazers had levels equal to or above that value. The importance of some environmental factors on the blood-level of cadmium was studied with discrimination analysis. The length of the splice was found to be almost the sole determining factor for the cadmium concentration in blood. All brazers working with splices shorter than 2 cm had blood concentrations below 10 micrograms/L, while 87% of the brazers working with splices longer than 10 cm had blood concentrations equal to or above 10 micrograms/L. Other factors like age, sex, exposure time, smoking habit and brazing method were devoid of any measurable importance.

摘要

对102名至少有10%工作日使用含镉硬焊料工作的钎焊工,研究了不同工作因素对镉摄取量的影响。镉的血浓度在低于1至113微克/升(低于9至1010纳摩尔/升)之间变化。71名钎焊工的血镉浓度低于10微克/升(89纳摩尔/升),31名钎焊工的血镉浓度等于或高于该值。采用判别分析研究了一些环境因素对血镉水平的重要性。发现接头长度几乎是血镉浓度的唯一决定因素。所有使用长度短于2厘米接头的钎焊工血镉浓度均低于10微克/升,而使用长度长于10厘米接头的钎焊工中87%血镉浓度等于或高于10微克/升。年龄、性别、暴露时间、吸烟习惯和钎焊方法等其他因素均无任何可测量的重要性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验