Flexure fatigue of 10 commonly used denture base resins.

The flexure fatigue properties of 10 denture base resins (four different types) were tested. Each specimen underwent two-way testing in a water bath maintained at 37 degrees +/- 1 degree C. A load of 3,650 gm was applied a 342 flexures per minute until the specimen broke. The resin types listed in order of increasing resistance to flexure fatigue are polymethylmethacrylate (PMM) pour resins, PMM thermosetting resins, vinyl resins, and a PMM grafted resin. Although small samples size and scatter of results limit broad application of this data, it is of some significance that the grafted resin Lucitone 199 tended to withstand repeated flexure when compared to the other resins.