Suppr超能文献

丹麦木材和家具行业关于工作姿势及手工物料搬运的全国性横断面研究。

A national cross-sectional study in the Danish wood and furniture industry on working postures and manual materials handling.

作者信息

Christensen H, Pedersen M B, Sjøgaard G

机构信息

National Institute of Occupational Health, Department of Physiology, Copenhagen, Denmark.

出版信息

Ergonomics. 1995 Apr;38(4):793-805. doi: 10.1080/00140139508925150.

Abstract

Musculoskeletal disorders constitute a major problem in the wood and furniture industry and identification of risk factors is needed urgently. Therefore, exposures to different work tasks and variation in the job were recorded based on an observation survey in combination with an interview among 281 employees working in wood working and painting departments. A questionnaire survey confirmed high frequencies of symptoms from the musculoskeletal system: The one-year prevalence of symptoms from the low back was 42% and symptoms from the neck/shoulder was 40%. The exposure was evaluated based on: (1) classification of work tasks, (2) work cycle time, (3) manual materials handling, (4) working postures, and (5) variation in the job. Among the employees 47% performed feeding or clearing of machines, 35% performed wood working or painting materials, and 18% performed various other operations. Among the employees 20% had no variation in their job while 44% had little variation. Manual materials handling of 375 different burdens was observed, which most often occurred during feeding or clearing of machines. The weight of burdens lifted was 0.5-87.0 kg, where 2% had a weight of more than 50 kg. Among the lifting conditions 30% were evaluated as implying a risk of injury. An additional risk factor was the high total tonnage lifted per day, which was estimated to range from 132 kg to 58,800 kg. Working postures implied a risk of injury due to prolonged forward and lateral flexions of the neck, which was seen most frequently during wood working or painting materials. These data substantiate the finding that work tasks mainly during feeding or clearing of machines imply a risk of injury to the low back and a risk of injury to the neck and shoulder area mainly during wood working or painting materials. Optimal strategies for job redesign may be worked out by using these data in order to prevent occupational musculoskeletal disorders.

摘要

肌肉骨骼疾病是木材和家具行业的一个主要问题,迫切需要识别风险因素。因此,基于一项观察性调查,并结合对木材加工和喷漆部门的281名员工进行的访谈,记录了他们所接触的不同工作任务和工作中的变化情况。一项问卷调查证实,肌肉骨骼系统症状的发生率很高:下背部症状的一年患病率为42%,颈部/肩部症状的一年患病率为40%。根据以下方面对暴露情况进行了评估:(1)工作任务分类;(2)工作周期时间;(3)手工搬运材料;(4)工作姿势;(5)工作中的变化情况。在员工中,47%的人负责机器的进料或清理,35%的人负责木材加工或喷漆材料,18%的人负责其他各种操作。在员工中,20%的人工作没有变化,44%的人工作变化很小。观察到375种不同负荷的手工搬运材料情况,其中最常发生在机器的进料或清理过程中。所搬运负荷的重量为0.5至87.0千克,其中2%的负荷重量超过50千克。在搬运条件中,30%被评估为有受伤风险。另一个风险因素是每天搬运的总吨位很高,估计范围为132千克至58,800千克。工作姿势因颈部长期向前和向侧面弯曲而有受伤风险,这在木材加工或喷漆材料过程中最为常见。这些数据证实了以下发现:主要在机器进料或清理过程中的工作任务会导致下背部受伤风险增加,而主要在木材加工或喷漆材料过程中的工作任务会导致颈部和肩部区域受伤风险增加。利用这些数据可以制定出最佳的工作重新设计策略,以预防职业性肌肉骨骼疾病。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验