Suppr超能文献

双平面经食管彩色多普勒超声心动图通过二尖瓣血流喷射宽度评估二尖瓣面积。

Biplane transesophageal color Doppler echocardiography for assessment of mitral valve area with mitral inflow jet widths.

作者信息

Chen C, Schneider B, Koschyk D, Chen L, Shuaib T, Hamm C, Gillam L, Kupper W, Meinertz T

机构信息

Department of Cardiology, University Hospital Hamburg, Germany.

出版信息

J Am Soc Echocardiogr. 1995 Mar-Apr;8(2):121-31. doi: 10.1016/s0894-7317(05)80401-8.

Abstract

Biplane transesophageal color Doppler echocardiography can image the mitral valve orifice in two orthogonal views. If the maximal stenotic jet width through the mitral valve obtained with the vertical transducer represents the major axis, the stenotic jet width dissected by the horizontal transducer should be the minor axis of the mitral orifice. Thus the mitral valve area can be calculated assuming an oval shape of mitral orifice. Nineteen patients with mitral stenosis were investigated. Maximal mitral stenotic jet width (JW1) was searched on a vertical plane and the jet width from the orthogonal view (JW2) was obtained on a horizontal plane. Mitral valve areas from the color Doppler jet widths were calculated by pi.JW1/2.JW2/2 and compared with those derived from Gorlin's formula. Adequate quality of echocardiographic images could be obtained in all patients for transesophageal color Doppler jet width measurements or Doppler pressure half-time determinations and in 16 of 19 patients for transthoracic planimetery of the mitral orifice at the parasternal short axis. Mitral valve areas derived from biplane transesophageal color Doppler imaging (1.31 +/- 0.53 cm2) were not different from those calculated according to Gorlin's formula from the catheterization data (1.25 +/- 0.50 cm2), those determined by transthoracic echocardiographic planimetery (1.38 +/- 0.5 cm2), or those calculated from the Doppler pressure half-time method (1.32 +/- 0.41 cm2) (difference not significant by analysis of variance). There was a very strong correlation between transesophageal echocardiographic mitral valve areas and those derived from catheterization data (r = 0.94; standard error of the estimate = 0.13 cm2). A similar correlation was obtained for the planimetric echocardiographic method (r = 0.94; standard error of the estimate = 0.14 cm2). A slightly less strong correlation was found between mitral valve areas derived from the Doppler pressure half-time method and those derived from Gorlin's formula (r = 0.83; standard error of the estimate = 0.24 cm2). The pressure half-time method accurately predicted the mitral valve area in most (15/19) patients, but it significantly (> 0.4 cm2) overestimated mitral valve area in two patients with aortic regurgitation and underestimated (< 0.4 cm2) mitral valve area in two patients with left ventricular hypertrophy. Determination of mitral valve area by color Doppler biplane transesophageal echocardiography is an alternative for accurate estimation of mitral valve area and may be most useful in intraoperative monitoring during surgical or balloon mitral commissurotomy or in the case of inadequate imaging quality of transthoracic echocardiography.

摘要

双平面经食管彩色多普勒超声心动图可在两个相互垂直的视图中对二尖瓣口进行成像。如果垂直探头测得的穿过二尖瓣的最大狭窄射流宽度代表长轴,那么水平探头测得的狭窄射流宽度应为二尖瓣口的短轴。因此,假设二尖瓣口为椭圆形,即可计算二尖瓣面积。对19例二尖瓣狭窄患者进行了研究。在垂直平面上寻找二尖瓣最大狭窄射流宽度(JW1),并在水平平面上获得与之垂直视图的射流宽度(JW2)。根据彩色多普勒射流宽度计算二尖瓣面积,公式为π·JW1/2·JW2/2,并与通过戈林公式得出的二尖瓣面积进行比较。所有患者均能获得质量足够的超声心动图图像,用于经食管彩色多普勒射流宽度测量或多普勒压力减半时间测定,19例患者中有16例可在胸骨旁短轴进行经胸二尖瓣口面积测量。双平面经食管彩色多普勒成像得出的二尖瓣面积(1.31±0.53cm²)与根据心导管检查数据用戈林公式计算得出的二尖瓣面积(1.25±0.50cm²)、经胸超声心动图面积测量得出的二尖瓣面积(1.38±0.5cm²)或多普勒压力减半时间法计算得出的二尖瓣面积(1.32±0.41cm²)无差异(方差分析显示差异不显著)。经食管超声心动图测得的二尖瓣面积与心导管检查数据得出的二尖瓣面积之间存在非常强的相关性(r = 0.94;估计标准误 = 0.13cm²)。面积测量超声心动图方法也得到了类似的相关性(r = 0.94;估计标准误 = 0.14cm²)。多普勒压力减半时间法得出的二尖瓣面积与戈林公式得出的二尖瓣面积之间的相关性稍弱(r = 0.83;估计标准误 = 0.24cm²)。压力减半时间法在大多数(15/19)患者中准确预测了二尖瓣面积,但在2例主动脉瓣反流患者中显著高估(>0.4cm²)二尖瓣面积,在2例左心室肥厚患者中低估(<0.4cm²)二尖瓣面积。通过彩色多普勒双平面经食管超声心动图测定二尖瓣面积是准确估计二尖瓣面积的一种替代方法,在二尖瓣手术或球囊二尖瓣交界切开术中的术中监测或经胸超声心动图成像质量不足的情况下可能最有用。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验