McMullen T P, Lewis R N, McElhaney R N
Department of Biochemistry, University of Alberta, Edmonton, Canada.
Biophys J. 1994 Mar;66(3 Pt 1):741-52. doi: 10.1016/s0006-3495(94)80850-1.
We have investigated the comparative effects of the incorporation of increasing quantities of androstenol and cholesterol on the thermotropic phase behavior of aqueous dispersions of members of a homologous series of linear saturated diacyl PCs1 using high sensitivity DSC. We have also employed FTIR and 31P-NMR spectroscopy to study the comparative effects of androstenol and cholesterol incorporation on the organization of the host PC bilayer in both the gel and liquid-crystalline states. The effects of androstenol and cholesterol incorporation on the thermotropic phase behavior of shorter chain PCs like 14:0 PC are generally similar but not identical. The incorporation of either sterol progressively decreases the temperature and enthalpy, but not the cooperativity, of the pretransition and completely abolishes it at sterol concentrations above 5 mol%. Moreover, at sterol concentrations of 1 to 20-25 mol%, both androstenol and cholesterol incorporation produce DSC endotherms consisting of superimposed sharp and broad components, the former due to the hydrocarbon chain melting of sterol-poor and the latter to the melting of sterol-rich 14:0 PC domains. The temperature and cooperativity of the sharp component are reduced slightly with increasing concentration of androstenol or cholesterol, and the enthalpy of the sharp component decreases progressively and becomes zero at 20-25 mol% sterol. As well, at cholesterol or androstenol concentrations above 20-25 mol%, the enthalpy of the broad component also decreases linearly with increasing sterol incorporation and becomes zero at sterol levels of about 50 mol%. However, whereas cholesterol incorporation progressively increases the temperature of the broad component of the DSC endotherm, androstenol incorporation decreases the temperature of this component. In contrast, the effects of androstenol and cholesterol incorporation on the thermotropic phase behavior of the intermediate and longer chain PCs studied here are considerably different. Although the incorporation of cholesterol increases the main phase transition temperature of 16:0 PC slightly and decreases the phase transition of 18:0 PC and 21:0 PC, androstenol incorporation decreases the main phase transition temperatures of all three PCs rather markedly. Moreover, androstenol is less effective in reducing the enthalpy and cooperativity of the broad component of the DSC endotherm of 16:0 PC and especially 18:0 PC bilayers in comparison to cholesterol. Androstenol incorporation (> 5 mol%) also results in the appearance of a second, low temperature endotherm in the DSC traces of the intermediate and longer chain PC dispersions that is not observed in similar cholesterol/PC dispersions. FTIR and 31P-NMR results suggest that this endotherm arises from a temperature-induced dissolution of androstenol in the gel phase PC bilayers. This second endotherm occurs at lower androstenol concentrations and increases in area at a given androstenol level as the chain length of the host PC bilayer increases. We ascribe the increasing immiscibility of androstenol in both the gel and liquid-crystalline states of PC bilayers of increasing thickness to an increasing degree of hydrophobic mismatch between the androstenol molecule and the host phospholipid bilayer.
我们使用高灵敏度差示扫描量热法(DSC),研究了加入不同量的雄烯醇和胆固醇对一系列线性饱和二酰基磷脂酰胆碱(PCs1)同系物水分散体热致相行为的比较影响。我们还采用傅里叶变换红外光谱(FTIR)和磷-31核磁共振光谱(31P-NMR),来研究加入雄烯醇和胆固醇对凝胶态和液晶态主体PC双层结构的比较影响。加入雄烯醇和胆固醇对短链PC(如14:0 PC)热致相行为的影响通常相似但不完全相同。加入任何一种甾醇都会使预转变的温度和焓逐渐降低,但不会降低协同性,并且在甾醇浓度高于5 mol%时会完全消除预转变。此外,在甾醇浓度为1至20 - 25 mol%时,加入雄烯醇和胆固醇都会产生由叠加的尖锐和宽泛成分组成的DSC吸热峰,前者归因于贫甾醇区域烃链的熔化,后者归因于富甾醇的14:0 PC区域的熔化。随着雄烯醇或胆固醇浓度的增加,尖锐成分的温度和协同性略有降低,尖锐成分的焓逐渐降低,并在甾醇浓度为20 - 25 mol%时变为零。同样,在胆固醇或雄烯醇浓度高于20 - 25 mol%时,宽泛成分的焓也随着甾醇加入量的增加而线性降低,并在甾醇含量约为50 mol%时变为零。然而,加入胆固醇会使DSC吸热峰宽泛成分的温度逐渐升高,而加入雄烯醇则会降低该成分的温度。相比之下,加入雄烯醇和胆固醇对本文研究的中链和长链PC热致相行为的影响有很大不同。虽然加入胆固醇会使16:0 PC的主相变温度略有升高,并降低18:0 PC和21:0 PC的相变温度,但加入雄烯醇会显著降低所有这三种PC的主相变温度。此外,与胆固醇相比,雄烯醇在降低16:0 PC特别是18:0 PC双层DSC吸热峰宽泛成分的焓和协同性方面效果较差。加入雄烯醇(> 5 mol%)还会导致中链和长链PC分散体的DSC曲线上出现第二个低温吸热峰,而在类似的胆固醇/PC分散体中未观察到。FTIR和31P-NMR结果表明,这个吸热峰源于温度诱导的雄烯醇在凝胶相PC双层中的溶解。这个第二个吸热峰在较低的雄烯醇浓度下出现,并且在给定的雄烯醇水平下,随着主体PC双层链长度的增加,其面积会增大。我们将雄烯醇在厚度不断增加的PC双层的凝胶态和液晶态中越来越不互溶的现象归因于雄烯醇分子与主体磷脂双层之间疏水不匹配程度的增加。