Suppr超能文献

注入液温度和热敏电阻位置对热稀释法心输出量测定重复性的影响。

Effect of injectate temperature and thermistor position on reproducibility of thermodilution cardiac output determinations.

作者信息

Williams J E, Pfau S E, Deckelbaum L I

机构信息

Department of Internal Medicine (Cardiology), Yale University School of Medicine.

出版信息

Chest. 1994 Sep;106(3):895-8. doi: 10.1378/chest.106.3.895.

Abstract

STUDY OBJECTIVE

The purpose of this study was to evaluate the effect of thermistor position with varying injectate temperatures on the reproducibility of thermodilution cardiac output determination. The key hypothesis to be tested was that the positioning of the proximal thermistor at the right atrial port would improve the reproducibility of thermodilution cardiac output determination, independent of injectate temperature.

DESIGN

Prospective randomized trial.

SETTING

The study was performed in the cardiac catheterization laboratory of the West Haven Veterans Affairs Medical Center.

PARTICIPANTS

Twenty consecutive patients undergoing right and left heart catheterizations were enrolled in the study.

INTERVENTIONS

Each patient underwent triplicate determination of thermodilution cardiac output measurements under four experimental conditions: (1) ambient or room temperature injectate using an external thermistor in the injectate reservoir; (2) iced injectate using an external thermistor; (3) room temperature injectate using an internal right atrium (RA) thermistor; and (4) iced injectate using an RA thermistor. Reproducibility was assessed by the coefficient of variation (CV) and standard error of the mean percent (SEM%), of the triplicate measurements.

MEASUREMENTS AND RESULTS

Using an internal RA thermistor improved the reproducibility of cardiac output determinations independent of injectate temperature. Using room temperature injectate, the CV was 12.8 percent using an external thermistor and 7.9 percent using an internal RA thermistor (p < 0.05). Using iced injectate, the CV was 10.2 percent using an external thermistor and 5.5 percent using an internal RA thermistor (p < 0.05).

CONCLUSIONS

Reproducibility of thermodilution cardiac output determinations is improved when injectate temperature is measured internally, at the RA, as opposed to externally in the reservoir. This has clinical implications for determining significant changes in serial cardiac output determinations.

摘要

研究目的

本研究旨在评估不同注射温度下热敏电阻位置对热稀释法心输出量测定重复性的影响。要检验的关键假设是,右心房端口近端热敏电阻的位置可提高热稀释法心输出量测定的重复性,且与注射温度无关。

设计

前瞻性随机试验。

地点

研究在韦斯特黑文退伍军人事务医疗中心的心导管实验室进行。

参与者

连续20例接受左右心导管检查的患者纳入研究。

干预措施

每位患者在四种实验条件下进行三次热稀释法心输出量测量:(1)使用注射储液器中的外部热敏电阻,注射常温或室温液体;(2)使用外部热敏电阻,注射冰盐水;(3)使用右心房(RA)内部热敏电阻,注射室温液体;(4)使用RA内部热敏电阻,注射冰盐水。通过三次测量的变异系数(CV)和平均百分比标准误差(SEM%)评估重复性。

测量与结果

使用RA内部热敏电阻可提高心输出量测定的重复性,与注射温度无关。使用室温液体时,外部热敏电阻的CV为12.8%,RA内部热敏电阻的CV为7.9%(p<0.05)。使用冰盐水时,外部热敏电阻的CV为10.2%,RA内部热敏电阻的CV为5.5%(p<0.05)。

结论

与在储液器外部测量相比,在RA内部测量注射温度时,热稀释法心输出量测定的重复性得到改善。这对确定连续心输出量测定中的显著变化具有临床意义。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验