Orthodontic band retention on primary molar stainless steel crowns.

The retention of orthodontic bands cemented on primary molar stainless steel crowns (SSC) was studied in vitro. Unitek maxillary and mandibular 1st and 2nd primary molar SSC were fitted with one of four commonly used orthodontic bands (Unitek regular, Unitek narrow, Rocky Mountain, or custom bands made from SSC) using glass ionomer cement. The cemented samples were tested for their resistance to dislodgment on the Instron Universal Testing Machine (Instron Engineering Corp., Canton, MA) in tensile mode. Alpha level for statistical significance was set at alpha = 0.05. Unitek regular bands cemented on the 2nd molar crowns and Unitek narrow bands cemented on the 1st molar crown samples had equivalent or superior resistance to dislodgment compared with the other bands in the study. When the inside of the band and the outside band-bearing surfaces of selected crowns were lightly scored with a diamond bur prior to cementation, samples exhibited significantly superior retention. Subgroup means increased from 107 to 330%, compared to the values obtained in their preroughened state. The mean values obtained using the roughened band/crown interface technique (range 52.9 +/- 7.6 to 73.6 +/- 8.4 lbs) compared favorably with retention values from the literature for orthodontic bands cemented on permanent molar and premolar teeth.