• 文献检索
  • 文档翻译
  • 深度研究
  • 学术资讯
  • Suppr Zotero 插件Zotero 插件
  • 邀请有礼
  • 套餐&价格
  • 历史记录
应用&插件
Suppr Zotero 插件Zotero 插件浏览器插件Mac 客户端Windows 客户端微信小程序
定价
高级版会员购买积分包购买API积分包
服务
文献检索文档翻译深度研究API 文档MCP 服务
关于我们
关于 Suppr公司介绍联系我们用户协议隐私条款
关注我们

Suppr 超能文献

核心技术专利:CN118964589B侵权必究
粤ICP备2023148730 号-1Suppr @ 2026

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验

光固化苯基-P在TEGDMA中与涂抹层保留的牛牙本质的粘结耐久性。

Bonding durability of photocured phenyl-P in TEGDMA to smear layer-retained bovine dentin.

作者信息

Watanabe I, Nakabayashi N

机构信息

Division of Organic Materials, Institute for Medical and Dental Engineering, Tokyo Medical and Dental University, Japan.

出版信息

Quintessence Int. 1993 May;24(5):335-42.

PMID:8362048
Abstract

The long-term durability of a photocured resin bond to ground bovine dentin with its smear layer retained was investigated. The bonding resin that was employed was composed of 5.0 wt% 2-(methacryloxy)ethyl phenyl hydrogen phosphate (phenyl-P) as a diffusion-promoting monomer, 0.5 wt% camphorquinone as a photosensitizer, and 0.5 wt% N-phenylglycine as a reducing agent in triethyleneglycol dimethacrylate. Following polymerization of the bonding resin, a composite resin was placed and photocured for 60 seconds. Prepared specimens were stored in 37 degrees C water for 1 day, 6 months, and 1 year. Measured tensile bond strengths were 6.7 MPa after 1 day of storage, 4.1 MPa after 6 months of storage, and 2.8 mPa after 1 year of storage. Examinations of the interfaces after fracture under tensile loading suggested that long-term water-immersion weakened the bonds between the photocured adhesive resin and the smear layer-retained dentin because there was insufficient diffusion of the adhesive resin through the retained smear layer.

摘要

研究了光固化树脂与保留有玷污层的磨除牛牙本质之间的长期耐久性。所使用的粘结树脂由5.0 wt%的2-(甲基丙烯酰氧基)乙基苯基磷酸氢酯(苯基-P)作为扩散促进单体、0.5 wt%的樟脑醌作为光敏剂以及0.5 wt%的N-苯基甘氨酸作为三乙二醇二甲基丙烯酸酯中的还原剂组成。粘结树脂聚合后,放置复合树脂并光固化60秒。制备的标本在37℃水中储存1天、6个月和1年。储存1天后测得的拉伸粘结强度为6.7 MPa,储存6个月后为4.1 MPa,储存1年后为2.8 mPa。拉伸加载断裂后对界面的检查表明,长期水浸会削弱光固化粘结树脂与保留有玷污层的牙本质之间的粘结,因为粘结树脂通过保留的玷污层的扩散不足。

相似文献

1
Bonding durability of photocured phenyl-P in TEGDMA to smear layer-retained bovine dentin.光固化苯基-P在TEGDMA中与涂抹层保留的牛牙本质的粘结耐久性。
Quintessence Int. 1993 May;24(5):335-42.
2
Bonding to ground dentin by a phenyl-P self-etching primer.通过苯基-P自酸蚀底漆与牙本质基层结合。
J Dent Res. 1994 Jun;73(6):1212-20. doi: 10.1177/00220345940730061301.
3
Tensile bond strengths of resin cements to bovine dentin using resin coating.使用树脂涂层时树脂黏固剂与牛牙本质的拉伸粘结强度。
Am J Dent. 2003 Sep;16 Spec No:41A-46A.
4
[Effect of adhesion promoting monomers on adhesion to ground dentin].[粘接促进单体对牙本质表面粘接的影响]
Shika Zairyo Kikai. 1990 Nov;9(6):888-93.
5
The durability of adhesion to phosphoric acid etched, wet dentin substrates.对磷酸蚀刻的湿牙本质底物的黏附耐久性。
Dent Mater. 1998 Sep;14(5):347-52. doi: 10.1016/s0109-5641(99)00003-2.
6
Effect of Smear Layers Created by Different Burs on Durability of Self-Etching Adhesive Bond to Dentin of Primary Teeth.不同车针形成的玷污层对自酸蚀粘结剂与乳牙牙本质粘结耐久性的影响。
J Clin Pediatr Dent. 2015 Spring;39(3):224-30. doi: 10.17796/1053-4628-39.3.224.
7
Effect of pulpal pressure on the microtensile bond strength of luting resin cements to human dentin.牙髓压力对粘结树脂水门汀与人类牙本质微拉伸粘结强度的影响。
Dent Mater. 2009 Jan;25(1):58-66. doi: 10.1016/j.dental.2008.05.005. Epub 2008 Jun 24.
8
Influence of storage conditions of adhesive vials on dentin bond strength.黏合剂小瓶储存条件对牙本质粘结强度的影响。
Oper Dent. 2010 Sep-Oct;35(5):508-14. doi: 10.2341/09-367-L.
9
The effect on shear bond strength of rewetting dry dentin with two desensitizers.两种脱敏剂对干燥牙本质再湿润后的剪切粘结强度的影响。
Oper Dent. 2003 May-Jun;28(3):287-96.
10
Effect of phosphoric acid concentration on wet-bonding to etched dentin.磷酸浓度对蚀刻牙本质湿粘结的影响。
Dent Mater. 1996 Jul;12(4):250-5. doi: 10.1016/s0109-5641(96)80031-5.

引用本文的文献

1
Marginal Micro-Seal and Tensile Bond Strength of a Biopolymer Hybrid Layer Coupled with Dental Prosthesis Using a Primerless-Wet System.使用无底漆湿式系统的生物聚合物混合层与牙科修复体结合的边缘微封闭和拉伸粘结强度
Polymers (Basel). 2023 Jan 5;15(2):283. doi: 10.3390/polym15020283.