Suppr超能文献

冠状动脉的三维呼吸门控磁共振血管造影:与传统冠状动脉造影的比较。

Three-dimensional respiratory-gated MR angiography of coronary arteries: comparison with conventional coronary angiography.

作者信息

Post J C, van Rossum A C, Hofman M B, Valk J, Visser C A

机构信息

Department of Cardiology, Free University Hospital, Amsterdam, The Netherlands.

出版信息

AJR Am J Roentgenol. 1996 Jun;166(6):1399-404. doi: 10.2214/ajr.166.6.8633453.

Abstract

OBJECTIVE

MR coronary angiography is most often performed using two-dimensional techniques. Although three-dimensional (3D) acquisitions do have important advantages, they take too long for a single breath-hold and are thus susceptible to respiratory motion artifacts. The purpose of this study was to investigate the accuracy of a unique respiratory-gated 3D MR angiographic technique in identifying the proximal coronary arteries in patients suspected of having coronary artery disease. In addition, we investigated the capability of this technique to detect proximal stenoses.

SUBJECTS AND METHODS

We performed a prospective blinded study in 20 patients who were referred for conventional coronary angiography. A cardiac-gated 3D gradient-echo sequence with fat suppression was used. Retrospective respiratory gating was performed using navigator echoes of the diaphragm position. Using multiplanar reformatting, two independent readers blindly analyzed the data sets for visualization of major coronary arteries, lengths of imaged segments, and detection of significant stenoses (> 50% occlusion of the luminal diameter by conventional angiography).

RESULTS

Seventy-seven of 80 (96%) coronary arteries were positively identified. In one patient, an anomalous coronary anatomy was readily identified and confirmed by conventional angiography. The average lengths of the imaged segments of the right, left main, left anterior descending, and left circumflex coronary arteries were 58 +/- 13 mm, 9 +/- 5 mm, 59 +/- 16 mm, and 24 +/- 10 mm, respectively. Overall sensitivity for the detection of stenoses was low (38%), with a specificity of 95%. Interobserver agreement was 0.92, with a kappa value of 0.65.

CONCLUSION

Respiratory-gated 3D MR angiography allows accurate identification of proximal coronary arteries and may be valuable for 3D imaging of coronary anomalies. Further technical improvements are required to enhance the value of the technique in detecting stenoses.

摘要

目的

磁共振冠状动脉造影通常采用二维技术进行。尽管三维(3D)采集具有重要优势,但单次屏气时间过长,因此易受呼吸运动伪影影响。本研究的目的是探讨一种独特的呼吸门控3D磁共振血管造影技术在疑似冠心病患者中识别近端冠状动脉的准确性。此外,我们还研究了该技术检测近端狭窄的能力。

受试者与方法

我们对20名因常规冠状动脉造影而转诊的患者进行了一项前瞻性盲法研究。使用了具有脂肪抑制功能的心脏门控3D梯度回波序列。利用膈肌位置的导航回波进行回顾性呼吸门控。通过多平面重组,两名独立的阅片者对数据集进行盲法分析,以观察主要冠状动脉、成像节段长度以及检测显著狭窄(常规血管造影显示管腔直径闭塞>50%)。

结果

80条冠状动脉中有77条(96%)被明确识别。在一名患者中,异常冠状动脉解剖结构通过常规血管造影很容易被识别并得到证实。右冠状动脉、左主干、左前降支和左旋支冠状动脉成像节段的平均长度分别为58±13mm、9±5mm、59±16mm和24±10mm。总体狭窄检测敏感性较低(38%),特异性为95%。观察者间一致性为0.92,kappa值为0.65。

结论

呼吸门控3D磁共振血管造影能够准确识别近端冠状动脉,对于冠状动脉异常的3D成像可能具有重要价值。需要进一步的技术改进以提高该技术在检测狭窄方面的价值。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验