Sturtridge W, Lentle B, Hanley D A
Department of Medicine, University of Toronto.
CMAJ. 1996 Oct 1;155(7):924-9.
To determine the best method of diagnosing osteoporosis and determining fracture risk and to promote standards in the use of bone densitometry and the reporting of results.
Methods of bone mineral density measurement: dual-energy x-ray absorptiometry (DXA), radiographic absorptiometry, single-photon absorptiometry, dual-photon absorptiometry, quantitative computed tomography, quantitative ultrasound, neutron activation analysis. The options of using bone densitometry in individual patient management and as a mass screening tool are also considered.
Appropriate use of densitometry to promote accurate diagnosis and assessment of fracture risk and timely, appropriate treatment.
Relevant clinical studies and reports were examined. Clinical practice in Canada was also considered.
Accurate assessment of osteoporotic fracture risk and diagnosis of osteoporosis and assuring low exposure to medical radiation were given a high value.
BENEFITS, HARMS AND COSTS: Early diagnosis through bone density measurement allows proper management of osteoporosis to minimize injury and disability, improve quality of life and reduce the personal and social costs associated with the condition. Potential harms include radiation exposure and cost. The harms and costs of appropriate use of DXA are minimal compared with the harms and costs associated with osteoporosis.
Bone mineral density should be measured only to assist in making a clinical management choice. DXA is the best method of measuring bone density and, thus, the best available indicator of osteoporotic fracture risk. Plain radiographs may supplement DXA if there is a specific reason for their use. Measurement of the lumbar spine and femoral neck is standard, but a different site or a single measurement is recommended in specific cases. Unless accelerated bone loss is suspected, DXA should be repeated every 2 to 4 years for patients receiving ovarian hormone therapy and 1 to 2 years for patients undergoing bisphosphonate therapy. Measurements and reporting of results must be standardized. Reports should refer to the World Health Organization's recommended definitions of osteopenia and osteoporosis and provide actual measurement and its relation to peak bone mass.
确定诊断骨质疏松症及评估骨折风险的最佳方法,并推动骨密度测定方法的使用标准及结果报告规范。
骨矿物质密度测量方法:双能X线吸收法(DXA)、放射吸收法、单光子吸收法、双光子吸收法、定量计算机断层扫描、定量超声、中子活化分析。还考虑了在个体患者管理中及作为大规模筛查工具使用骨密度测定的选项。
合理使用骨密度测定以促进骨折风险的准确诊断和评估,并实现及时、恰当的治疗。
审查了相关临床研究和报告。还考虑了加拿大的临床实践。
准确评估骨质疏松性骨折风险和诊断骨质疏松症,并确保低剂量医疗辐射受到高度重视。
益处、危害和成本:通过骨密度测量进行早期诊断可实现对骨质疏松症的合理管理,以尽量减少损伤和残疾,改善生活质量,并降低与该疾病相关的个人和社会成本。潜在危害包括辐射暴露和成本。与骨质疏松症相关的危害和成本相比,合理使用DXA的危害和成本极小。
仅应测量骨矿物质密度以辅助做出临床管理决策。DXA是测量骨密度的最佳方法,因此是骨质疏松性骨折风险的最佳可用指标。如果有特定使用理由,普通X线片可补充DXA检查。测量腰椎和股骨颈是标准做法,但在特定情况下建议选择不同部位或进行单次测量。除非怀疑有加速骨质流失情况,接受卵巢激素治疗的患者应每2至4年重复进行DXA检查,接受双膦酸盐治疗的患者应每1至2年重复进行检查。测量和结果报告必须标准化。报告应参考世界卫生组织推荐的骨质减少和骨质疏松症定义,并提供实际测量值及其与峰值骨量的关系。