Faber K J, Cordy M E, Milne A D, Chess D G, King G J, Johnson J A
Musculoskeletal Research Laboratory, The Lawson Research Institute, Hand and Upper Limb Center, St. Joseph's Health Centre, The University of Western Ontario, London, Canada.
Clin Orthop Relat Res. 1997 Jan(334):150-6.
An in vitro study was conducted to assess the efficacy of advanced cementing techniques in the fixation of the humeral stem in elbow arthroplasty. Sixteen fresh frozen cadaveric distal humeri were prepared to accept an acrylic sham humeral stem. Conventional cementing technique using doughy cement manually inserted and packed was performed in 8 specimens. The advanced cementing technique, consisting of canal irrigation, brushing and drying with gauze, canal plugging, and low viscosity cement pressurization with a delivery system was performed in the other specimens. All humeri subsequently were sectioned into 10 mm thick sections, photographed, and digitized to quantify the perimeter and area of the stem, cement mantle, corticocancellous junction, and cement voids. The degree of cement filling, determined from the area fraction of cement to the total available area within the corticocancellous junction, was significantly greater in the advanced group compared with the conventional group. Mechanical assessment of the specimens consisted of a push out load to failure test of the cement mantle from bone. For all locations in the distal humerus, the failure load and failure stress in the advanced group was significantly greater than the conventional group. It is concluded that development of an effective cement restrictor and application of advanced cement techniques in vivo should improve the initial fixation of the humeral component and may decrease the incidence of aseptic loosening associated with elbow arthroplasty.
