Burman C, Chui C S, Kutcher G, Leibel S, Zelefsky M, LoSasso T, Spirou S, Wu Q, Yang J, Stein J, Mohan R, Fuks Z, Ling C C
Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, NY 10021, USA.
Int J Radiat Oncol Biol Phys. 1997 Nov 1;39(4):863-73. doi: 10.1016/s0360-3016(97)00458-6.
To improve the local control of patients with adenocarcinoma of the prostate we have implemented intensity modulated radiation therapy (IMRT) to deliver a prescribed dose of 81 Gy. This method is based on inverse planning and the use of dynamic multileaf collimators (DMLC). Because IMRT is a new modality, a major emphasis was on the quality assurance of each component of the process and on patient safety. In this article we describe in detail our procedures and quality assurance program.
Using an inverse algorithm, we have developed a treatment plan consisting five intensity-modulated (IM) photon fields that are delivered with DMLC. In the planning stage, the planner specifies the number of beams and their directions, and the desired doses for the target, the normal organs and the "overlap" regions. Then, the inverse algorithm designs intensity profiles that best meet the specified criteria. A second algorithm determines the leaf motion that would produce the designed intensity pattern and produces a DMLC file as input to the MLC control computer. Our quality assurance program for the planning and treatment delivery process includes the following components: 1) verification of the DMLC field boundary on localization port film, 2) verification that the leaf motion of the DMLC file produces the planned dose distribution (with an independent calculation), 3) comparison of dose distribution produced by DMLC in a flat phantom with that calculated by the treatment planning computer for the same experimental condition, 4) comparison of the planned leaf motions with that implemented for the treatment (as recorded on the MLC log files), 5) confirmation of the initial and final positions of the MLC for each field by a record-and-verify system, and 6) in vivo dose measurements.
Using a five-field IMRT plan we have customized dose distribution to conform to and deliver 81 Gy to the PTV. In addition, in the overlap regions between the PTV and the rectum, and between the PTV and the bladder, the dose is kept within the tolerance of the respective organs. Our QA checks show acceptable agreement between the planned and the implemented leaf motions. Correspondingly, film and TLD dosimetry indicates that doses delivered agrees with the planned dose to within 2%. As of September 15, 1996, we have treated eight patients to 81 Gy with IMRT.
For complex planning problems where the surrounding normal tissues place severe constraints on the prescription dose, IMRT provides a powerful and efficient solution. Given a comprehensive and rigorous quality-assurance program, the intensity-modulated fields can be efficaciously and accurately delivered using DMLC. IMRT treatment is now ready for routine implementation on a large scale in our clinic.
为提高前列腺腺癌患者的局部控制率,我们采用调强放射治疗(IMRT)来给予规定剂量81 Gy。该方法基于逆向计划和动态多叶准直器(DMLC)的使用。由于IMRT是一种新的治疗方式,主要重点在于该过程各组成部分的质量保证以及患者安全。在本文中,我们详细描述我们的程序和质量保证计划。
使用逆向算法,我们制定了一个由五个调强(IM)光子射野组成的治疗计划,这些射野通过DMLC进行照射。在计划阶段,计划者指定射野数量及其方向,以及靶区、正常器官和“重叠”区域的期望剂量。然后,逆向算法设计出最符合指定标准的强度分布图。另一种算法确定能产生设计强度模式的叶片运动,并生成一个DMLC文件作为MLC控制计算机的输入。我们针对计划和治疗实施过程的质量保证计划包括以下几个部分:1)在定位端口片上验证DMLC射野边界;2)验证DMLC文件的叶片运动产生计划的剂量分布(通过独立计算);3)比较DMLC在平板模体中产生的剂量分布与治疗计划计算机在相同实验条件下计算的剂量分布;4)比较计划的叶片运动与治疗实施的叶片运动(如MLC日志文件中记录的);5)通过记录与验证系统确认每个射野MLC的初始和最终位置;6)进行体内剂量测量。
使用五野IMRT计划,我们定制了剂量分布,使其符合PTV并给予81 Gy剂量。此外,在PTV与直肠之间以及PTV与膀胱之间的重叠区域,剂量保持在各相应器官的耐受范围内。我们的QA检查显示计划的和实施的叶片运动之间具有可接受的一致性。相应地,胶片和TLD剂量测定表明所给予的剂量与计划剂量的偏差在2%以内。截至1996年9月15日,我们已用IMRT治疗了8例患者至81 Gy剂量。
对于周围正常组织对处方剂量施加严格限制的复杂计划问题,IMRT提供了一种强大而有效的解决方案。有了全面而严格的质量保证计划,使用DMLC可以有效且准确地给予调强射野。IMRT治疗现在已准备好在我们的临床中大规模常规实施。