Suppr超能文献

由正硅酸乙酯制备二氧化硅气凝胶

Preparation of Silica Aerogel from TEOS.

作者信息

Tamon H, Kitamura T, Okazaki M

机构信息

Department of Chemical Engineering, Kyoto University, Kyoto, 606-01, Japan

出版信息

J Colloid Interface Sci. 1998 Jan 15;197(2):353-9. doi: 10.1006/jcis.1997.5269.

Abstract

Silica alcogels were synthesized by the sol-gel polymerization of tetraethylorthosilicate (TEOS). In the synthesis, HCl and NH3 were used as hydrolysis and condensation catalysts. The gelation time became short and the visible light transmittance increased with increasing the amount of HCl or lengthening the hydrolysis time. The alcogels were dried under supercritical conditions with carbon dioxide, and silica aerogels were obtained. As a result of characterization by visible light transmission and N2 adsorption, the aerogels are mesoporous materials with high surface areas. The experimental results suggest that the aerogel properties are not influenced by the drying conditions such as extraction temperature, extraction time, depressurizing temperature, and depressurizing rate. On the other hand, the properties are changed under the conditions of sol-gel polymerization. In the preparation of highly transparent aerogels with high surface areas and large pore volumes, it is necessary to synthesize highly transparent alcogels. It is found that the visible light transmittance of alcogels is an index for preparing aerogels from TEOS. Copyright 1998 Academic Press. Copyright 1998Academic Press

摘要

通过正硅酸乙酯(TEOS)的溶胶 - 凝胶聚合反应合成了二氧化硅醇凝胶。在合成过程中,HCl和NH₃用作水解和缩合催化剂。随着HCl用量的增加或水解时间的延长,凝胶化时间缩短,可见光透过率增加。醇凝胶在超临界二氧化碳条件下干燥,得到二氧化硅气凝胶。通过可见光透射和N₂吸附表征的结果表明,气凝胶是具有高比表面积的介孔材料。实验结果表明,气凝胶的性能不受萃取温度、萃取时间、降压温度和降压速率等干燥条件的影响。另一方面,在溶胶 - 凝胶聚合条件下性能会发生变化。在制备具有高比表面积和大孔体积的高透明度气凝胶时,有必要合成高透明度的醇凝胶。发现醇凝胶的可见光透过率是由TEOS制备气凝胶的一个指标。版权所有1998年学术出版社。版权所有1998年学术出版社

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验