Suppr超能文献

腰骶椎的生物力学测试。

Biomechanical testing of the lumbosacral spine.

作者信息

Kostuik J P, Valdevit A, Chang H G, Kanzaki K

机构信息

Department of Orthopaedic Surgery, Johns Hopkins University, School of Medicine, Baltimore, Maryland, USA.

出版信息

Spine (Phila Pa 1976). 1998 Aug 15;23(16):1721-8. doi: 10.1097/00007632-199808150-00002.

Abstract

OBJECTIVE

To assess various forms of anterior and posterior sacral fixation and to study the influence of anterior lumbosacral fixation and posterior pedicle fixation at L5 in conjunction with lumbosacral fixation.

SUMMARY OF BACKGROUND DATA

Moments at the lumbosacral junction are high in the long constructs requiring lumbosacral fixation. The purpose of this study was to assess bending moments in flexion-extension and lateral bending and rotational forces at the lumbosacral junction involving a variety of long constructs to the lumbosacral junction. The incidence of pseudarthrosis in such constructs in the adult spine literature ranges from 7% to 40%.

METHODS

An alignment jig was designed to display three-dimensional motion in the three orthogonal planes. Nine constructs of five specimens each were tested. These consisted of fixation at T12-L5-S1 (construct 1), T12-L5-S1 with anterior L5-S1 fixation and grafting (construct 2), T12-L5-S1, S2 with and without L5-S1 fixation and grafting anterior (constructs 3 and 4, respectfully), T12-S1, S2 with and without L5-S1 anterior grafting and fixation (constructs 5 and 6, respectfully), T12 Jackson intrasacral fixation with or without L5-S1 grafting anteriorly at the anterior fixation (constructs 7 and 8, respectfully), and T12-L5-S1, S2 fixation with anterior grafting only (construct 9).

RESULTS

The use of anterior fixation statistically increased stiffness in extension. There was a trend toward increasing stiffness in constructs with anterior fixation (two anterior anterior-oblique L5-S1 screws) and in other loading modes as well. Failure to use L5 screw fixation significantly decreased torsional rigidity in long constructs without anterior fixation.

CONCLUSIONS

In long constructs, particularly in scoliosis surgery requiring lumbosacral fixation, the addition of anterior fixation at L5-S1 is recommended. The addition of L5 fixation in addition to sacral fixation significantly decreases rotational stresses and is recommended as well.

摘要

目的

评估各种形式的骶骨前后固定方式,并研究L5椎体的前路腰骶固定和后路椎弓根固定联合腰骶固定的影响。

背景资料总结

在需要腰骶固定的长节段结构中,腰骶关节处的力矩较高。本研究的目的是评估涉及多种腰骶关节长节段结构在屈伸、侧方弯曲和旋转力作用下的弯矩。在成人脊柱文献中,此类结构的假关节发生率在7%至40%之间。

方法

设计了一种对线夹具,以显示在三个正交平面内的三维运动。对九个结构进行测试,每个结构有五个标本。这些结构包括T12-L5-S1固定(结构1)、T12-L5-S1联合L5-S1前路固定及植骨(结构2)、T12-L5-S1、S2联合或不联合L5-S1前路固定及植骨(分别为结构3和4)、T12-S1、S2联合或不联合L5-S1前路植骨及固定(分别为结构5和6)、T12 Jackson骶骨内固定联合或不联合L5-S1前路植骨及固定(分别为结构7和8),以及仅采用前路植骨的T12-L5-S1、S2固定(结构9)。

结果

前路固定的使用在统计学上增加了伸展时的刚度。在前路固定(两枚前路斜向L5-S1螺钉)的结构以及其他加载模式中,刚度有增加的趋势。在没有前路固定的长节段结构中,未使用L5螺钉固定会显著降低扭转刚度。

结论

在长节段结构中,特别是在需要腰骶固定的脊柱侧弯手术中,建议增加L5-S1前路固定。除骶骨固定外增加L5固定可显著降低旋转应力,也建议采用。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验