Kapur R, Rudolph A S
Center for Bioresource Development, George Mason University, Fairfax, Virginia, 22030, USA.
Exp Cell Res. 1998 Oct 10;244(1):275-85. doi: 10.1006/excr.1998.4156.
The objective of this study was to explore the potential use of self-assembled monolayers (SAMs) of alkylamine and arylalkyamine as well-defined, homogeneous, tailored in vitro model surfaces for exploring the effect of hydrodynamic flow on morphology and strength of adhesion of human umbilical vein endothelial cells. The cell surface area, shape, f-actin distribution, and adhesion strength of human umbilical vein endothelial cells cultured on self-assembled monolayers of organosilanes were found to be dependent on the chemical composition of the organosilane film and the magnitude of wall shear stress. The direct effects of the differences in chemistry between the two silanes, in modulating cellular response, are probably only secondary to the modulation of cellular functions mediated by differential protein adsorption and conformation on the two silanes. For short seeding times (30 min), prior to application of flow, both substrate chemistry and shear stress modulated the cellular morphology and cytoskeletal organization. For longer seeding times (24 h), prior to application of flow, the chemistry of the underlying surface was the dominant variable in modulating cellular morphology, while the hydrodynamic shear stress modulated the cytoskeleton organization. Cells on N-(2-aminoethyl)-3-aminopropyl trimethoxysilane (EDA) were pleomorphic, while cells on ((((aminoethyl)amino)methyl)phenylethyl)trimethoxysilane (PEDA) expressed a rounded morphology. Application of an incrementally loaded flow regime (0.07-1.25 ml/s) resulted in a time- and shear stress-dependent (10-180 dyn/cm2) detachment of cells, with the cells on EDA depicting higher resistance to wall shear stress. Cellular morphology correlated with the strength of adhesion; cells with rounded morphology on a hydrophobic silane, PEDA, were less tightly bound to the silane, while spread cells on a hydrophilic silane, EDA, were more tightly bound. The higher surface free energy of EDA is speculated to influence the increased cell spreading and strength of adhesion observed in these studies. The presence of the phenyl group in PEDA reduces the surface free energy and may account for the reduced spreading and lower strength of adhesion. The use of well-defined systems, such as monolayer organosilanes, with tunable surface physicochemical properties may serve to deconstruct the complex interaction of cells with extracellular matrix components: surface charge, surface hydrophobicity, and other short- and long-range forces can be individually controlled and correlated with cellular functions. The organosilane monolayers could serve as the building blocks for sequential addition of proteins or cell adhesive/cell repulsive cues to stepwise engineering and construction of more complex systems resembling ECM matrices.
本研究的目的是探索烷基胺和芳基烷基胺自组装单分子层(SAMs)作为定义明确、均匀、定制的体外模型表面的潜在用途,以研究流体动力流对人脐静脉内皮细胞形态和黏附强度的影响。发现在有机硅烷自组装单分子层上培养的人脐静脉内皮细胞的细胞表面积、形状、f-肌动蛋白分布和黏附强度取决于有机硅烷膜的化学成分和壁面剪应力的大小。两种硅烷之间化学性质的差异在调节细胞反应方面的直接作用,可能只是由两种硅烷上不同的蛋白质吸附和构象介导的细胞功能调节的次要因素。对于短接种时间(30分钟),在施加流动之前,底物化学性质和剪应力都调节细胞形态和细胞骨架组织。对于较长接种时间(24小时),在施加流动之前,下层表面的化学性质是调节细胞形态的主要变量,而流体动力剪应力调节细胞骨架组织。在N-(2-氨基乙基)-3-氨丙基三甲氧基硅烷(EDA)上的细胞是多形的,而在(((氨基乙基)氨基)甲基)苯乙基三甲氧基硅烷(PEDA)上的细胞呈现圆形形态。施加逐渐增加的流动状态(0.07 - 1.25毫升/秒)导致细胞随时间和剪应力(10 - 180达因/平方厘米)依赖性脱落,EDA上的细胞对壁面剪应力表现出更高的抗性。细胞形态与黏附强度相关;在疏水性硅烷PEDA上呈圆形形态的细胞与硅烷的结合较松散,而在亲水性硅烷EDA上伸展的细胞结合更紧密。据推测,EDA较高的表面自由能影响了在这些研究中观察到的细胞伸展增加和黏附强度增加。PEDA中苯基的存在降低了表面自由能,这可能解释了细胞伸展减少和黏附强度降低的原因。使用具有可调表面物理化学性质的定义明确的系统,如单层有机硅烷,可能有助于解构细胞与细胞外基质成分的复杂相互作用:表面电荷、表面疏水性以及其他短程和长程力可以单独控制,并与细胞功能相关联。有机硅烷单分子层可以作为依次添加蛋白质或细胞黏附/细胞排斥信号的基础,用于逐步工程化和构建更复杂的类似细胞外基质的系统。