Putnam A J, Cunningham J J, Dennis R G, Linderman J J, Mooney D J
Department of Chemical Engineering, Institute of Gerontology, University of Michigan, Ann Arbor, MI 48109-2136, USA.
J Cell Sci. 1998 Nov;111 ( Pt 22):3379-87. doi: 10.1242/jcs.111.22.3379.
Mechanical forces clearly regulate the development and phenotype of a variety of tissues and cultured cells. However, it is not clear how mechanical information is transduced intracellularly to alter cellular function. Thermodynamic modeling predicts that mechanical forces influence microtubule assembly, and hence suggest microtubules as one potential cytoskeletal target for mechanical signals. In this study, the assembly of microtubules was analyzed in rat aortic smooth muscle cells cultured on silicon rubber substrates exposed to step increases in applied strain. Cytoskeletal and total cellular protein fractions were extracted from the cells following application of the external strain, and tubulin levels were quantified biochemically via a competitive ELISA and western blotting using bovine brain tubulin as a standard. In the first set of experiments, smooth muscle cells were subjected to a step-increase in strain and the distribution of tubulin between monomeric, polymeric, and total cellular pools was followed with time. Microtubule mass increased rapidly following application of the strain, with a statistically significant increase (P<0.05) in microtubule mass from 373+/-32 pg/cell (t=0) to 514+/-30 pg/cell (t=15 minutes). In parallel, the amount of soluble tubulin decreased approximately fivefold. The microtubule mass decreased after 1 hour to a value of 437+/-24 pg/cell. In the second set of experiments, smooth muscle cells were subjected to increasing doses of externally applied strain using a custom-built strain device. Monomeric, polymeric, and total tubulin fractions were extracted after 15 minutes of applied strain and quantified as for the earlier experiments. Microtubule mass increased with increasing strain while total cellular tubulin levels remained essentially constant at all strain levels. These findings are consistent with a thermodynamic model which predicts that microtubule assembly is promoted as a cell is stretched and compressional loads on the microtubules are presumably relieved. Furthermore, these data suggest microtubules are a potential target for translating changes in externally applied mechanical stimuli to alterations in cellular phenotype.
机械力显然会调节多种组织和培养细胞的发育及表型。然而,目前尚不清楚机械信息是如何在细胞内进行转导以改变细胞功能的。热力学模型预测,机械力会影响微管组装,因此提示微管是机械信号的一个潜在细胞骨架靶点。在本研究中,对培养在硅橡胶基底上、承受逐步增加的外加应变的大鼠主动脉平滑肌细胞中的微管组装进行了分析。施加外部应变后,从细胞中提取细胞骨架和总细胞蛋白组分,并以牛脑微管蛋白为标准,通过竞争性酶联免疫吸附测定法和蛋白质印迹法对微管蛋白水平进行生化定量。在第一组实验中,平滑肌细胞承受应变的逐步增加,并随时间追踪微管蛋白在单体、聚合物和总细胞库之间的分布。施加应变后,微管质量迅速增加,微管质量从373±32 pg/细胞(t = 0)增至514±30 pg/细胞(t = 15分钟),具有统计学显著增加(P < 0.05)。同时,可溶性微管蛋白的量减少了约五倍。1小时后微管质量降至437±24 pg/细胞。在第二组实验中,使用定制的应变装置对平滑肌细胞施加递增剂量的外部应变。施加应变15分钟后,提取单体、聚合物和总微管蛋白组分,并如早期实验那样进行定量。微管质量随应变增加而增加,而在所有应变水平下总细胞微管蛋白水平基本保持恒定。这些发现与一个热力学模型一致,该模型预测随着细胞被拉伸,微管组装会被促进,并且微管上的压缩负荷可能会减轻。此外,这些数据表明微管是将外部施加的机械刺激变化转化为细胞表型改变的一个潜在靶点。