Kang C, Speller R
Harwell Laboratory, Oxon, UK.
Br J Radiol. 1998 Aug;71(848):861-7. doi: 10.1259/bjr.71.848.9828799.
Ultrasound measurements have been proposed as a means of providing structural information on bone but have also been shown to correlate with density. High correlation coefficients have been obtained in vitro, but are lower for in vivo work. The aim of this study was to investigate the relationship of broadband ultrasound attenuation (BUA), speed of sound (SOS) and stiffness, to bone mineral density (BMD) measured in the calcaneus at a closely matched region of interest (ROI). Measurements were made in 55 post-menopausal and 20 young, normal women. Calcaneus BMD measurements were made using an ROI (fixed by reference to external axes) to represent the area and location of the ultrasound transducers and an ROI based on anatomical markers, positioned in the posterior part of the calcaneus. BUA was significantly correlated with calcaneus BMD in the fixed ROI (r = 0.77, p < 0.0001) and the anatomical ROI (r = 0.78, p < 0.0001). Correlation of BUA with axial BMD was lower at r = 0.63, p < 0.0001 for the spine (L2-L4) and r = 0.59, p < 0.0001 for the femoral neck. Results for SOS and stiffness were very similar. From the calcaneus dual energy X-ray absorptiometry (DXA) scan images the region representing the ultrasound measurement area was found to contain cortical bone edges in 60% of cases. In 16% of scans a small part (4.5 +/- 4.0%) of the ROI measurement area fell partially outside the heel. However, there was no obvious discrepancy in the ultrasound results in the individual cases where this occurred. The correlation between calcaneus BMD and BUA was improved from r = 0.72 to r = 0.86 when scans with a cortical edge in the measurement ROI were excluded. The values for SOS were similar. In summary, BMD of the calcaneus, when closely matched to the site of ultrasound measurement shows significant correlation with ultrasound measurements. By excluding scans in which the ultrasound measurement appeared to include bone edges, correlations of approximately r = 0.86 were obtained. However, the BMD result still does not explain all of the variance in the ultrasound results.
超声测量已被提议作为一种提供骨骼结构信息的手段,但也已表明其与骨密度相关。在体外已获得高相关系数,但体内研究的相关系数较低。本研究的目的是调查在跟骨紧密匹配的感兴趣区域(ROI)测量的宽带超声衰减(BUA)、声速(SOS)和硬度与骨矿物质密度(BMD)之间的关系。对55名绝经后女性和20名年轻正常女性进行了测量。使用一个ROI(通过参考外部轴固定)来表示超声换能器的面积和位置,并使用一个基于解剖学标记的ROI来进行跟骨BMD测量,该ROI位于跟骨后部。在固定ROI中,BUA与跟骨BMD显著相关(r = 0.77,p < 0.0001),在解剖学ROI中也是如此(r = 0.78,p < 0.0001)。BUA与脊柱(L2 - L4)轴向BMD的相关性较低,r = 0.63,p < 0.0001,与股骨颈的相关性为r = 0.59,p < 0.0001。SOS和硬度的结果非常相似。从跟骨双能X线吸收法(DXA)扫描图像中发现,代表超声测量区域的区域在60%的病例中包含皮质骨边缘。在16%的扫描中,ROI测量区域的一小部分(4.5 +/- 4.0%)部分落在足跟之外。然而,在出现这种情况的个别病例中,超声结果没有明显差异。当排除测量ROI中有皮质边缘的扫描时,跟骨BMD与BUA之间的相关性从r = 0.72提高到r = 0.86。SOS的值相似。总之,当跟骨BMD与超声测量部位紧密匹配时,与超声测量显示出显著相关性。通过排除超声测量似乎包括骨边缘的扫描,获得了约r = 0.86的相关性。然而,BMD结果仍不能解释超声结果中的所有差异。