Judge R A, Jacobs R S, Frazier T, Snell E H, Pusey M L
Alliance for Microgravity Material Science and Applications, NASA/Marshall Space Flight Center, Huntsville, Alabama 35812, USA.
Biophys J. 1999 Sep;77(3):1585-93. doi: 10.1016/S0006-3495(99)77006-2.
Part of the challenge of macromolecular crystal growth for structure determination is obtaining crystals with a volume suitable for x-ray analysis. In this respect an understanding of the effect of solution conditions on macromolecule nucleation rates is advantageous. This study investigated the effects of supersaturation, temperature, and pH on the nucleation rate of tetragonal lysozyme crystals. Batch crystallization plates were prepared at given solution concentrations and incubated at set temperatures over 1 week. The number of crystals per well with their size and axial ratios were recorded and correlated with solution conditions. Crystal numbers were found to increase with increasing supersaturation and temperature. The most significant variable, however, was pH; crystal numbers changed by two orders of magnitude over the pH range 4.0-5.2. Crystal size also varied with solution conditions, with the largest crystals obtained at pH 5.2. Having optimized the crystallization conditions, we prepared a batch of crystals under the same initial conditions, and 50 of these crystals were analyzed by x-ray diffraction techniques. The results indicate that even under the same crystallization conditions, a marked variation in crystal properties exists.
用于结构测定的大分子晶体生长面临的部分挑战在于获得体积适合X射线分析的晶体。在这方面,了解溶液条件对大分子成核速率的影响是有益的。本研究调查了过饱和度、温度和pH对四方晶型溶菌酶晶体成核速率的影响。在给定的溶液浓度下制备分批结晶板,并在设定温度下孵育1周。记录每个孔中晶体的数量及其尺寸和轴比,并将其与溶液条件相关联。发现晶体数量随着过饱和度和温度的增加而增加。然而,最显著的变量是pH;在4.0-5.2的pH范围内,晶体数量变化了两个数量级。晶体尺寸也随溶液条件而变化,在pH 5.2时获得最大的晶体。优化结晶条件后,我们在相同的初始条件下制备了一批晶体,并通过X射线衍射技术对其中50个晶体进行了分析。结果表明,即使在相同的结晶条件下,晶体性质也存在显著差异。