Travaglini E C, Mildvan A S, Loeb L A
J Biol Chem. 1975 Nov 25;250(22):8647-56.
The kinetic properties of Escherichia coli DNA polymerase I were simplified to those of a 1 deoxynucleotide substrate reaction by the use of polynucleotide templates. With poly(dA)-oligo(dT) as the template-primer complex, Mg2+ decreases the Km of the substrate dTTP but has little or no effect on the Km of the substrate Mg-dTTP, suggesting that multiple pathways involving the binding of Mg2+, dTTP, and Mg-dTTP are operative in forming the active complex. The Km of free Mg2+, extrapolated to zero concentration of substrate (830 = 62 muM), agrees within a factor of 2 with the dissociation constant of magnesium from 4 +/- 1 sites on the enzyme determined previously by binding studies (Slater, J.P., Tamir, I., Loeb, L.A., and Mildvan, A.S. (1972) J. Biol. Chem. 247, 6784-6794). The maximal turnover number with poly(dA) as template is 5.7 +/- 0.7 s-1. Changing the nature of the base in the polydeoxynucleotide template alters the maximal rate of polydeoxynucleotide synthesis by an overall factor of 31 with poly(dC) is greater than poly(dT) is greater than poly(dA) is greater than poly(dG), indicating that pyrimidine templates are copied faster than purine templates. Changing the sugar structure from poly(dA) to poly(rA) causes a 3-fold increase in the rate of template copying. A study of the kinetic effects of all noncomplementary deoxynucleotides with all deoxynucleotide templates, as well as with poly(rA)-oligo(dT), yields complex patterns of activation and inhibition requiring from 1 to 2 additional binding sites for the noncomplementary nucleotides. The kinetically determined affinities of the active site of the enzyme-template-primer complex for the complementary free nucleotide (as measured by Km) generally exceed those for the noncomplementary neuclotides (as measured by KI slope) by 1 or more than 3 orders of magnitude.
通过使用多核苷酸模板,将大肠杆菌DNA聚合酶I的动力学特性简化为单脱氧核苷酸底物反应的动力学特性。以聚(dA)-寡聚(dT)作为模板-引物复合物,Mg2+降低底物dTTP的Km,但对底物Mg-dTTP的Km几乎没有影响,这表明涉及Mg2+、dTTP和Mg-dTTP结合的多种途径在形成活性复合物中起作用。将游离Mg2+的Km外推至底物浓度为零时(830 = 62 μM),与先前通过结合研究确定的酶上4 +/- 1个位点的镁解离常数相差不超过2倍(斯莱特,J.P.,塔米尔,I.,勒布,L.A.,和米尔德万,A.S.(1972年)《生物化学杂志》247,6784 - 6794)。以聚(dA)为模板时的最大周转数为5.7 +/- 0.7 s-1。改变聚脱氧核苷酸模板中碱基的性质会使聚脱氧核苷酸合成的最大速率总体上改变31倍,聚(dC)>聚(dT)>聚(dA)>聚(dG),这表明嘧啶模板的复制速度比嘌呤模板快。将糖结构从聚(dA)改为聚(rA)会使模板复制速率提高3倍。对所有非互补脱氧核苷酸与所有脱氧核苷酸模板以及与聚(rA)-寡聚(dT)的动力学效应研究,产生了复杂的激活和抑制模式,非互补核苷酸需要1到2个额外的结合位点。通过动力学测定的酶-模板-引物复合物活性位点对互补游离核苷酸的亲和力(以Km衡量)通常比非互补核苷酸的亲和力(以KI斜率衡量)高1个或超过3个数量级。