Jaffe M J, Wakefield A H, Telewski F, Gulley E, Biro R
Department of Biology, Wake Forest University, Winston-Salem, North Carolina 27109, USA.
Plant Physiol. 1985;77(3):722-30. doi: 10.1104/pp.77.3.722.
A nonintrusive auxonometric system, based on the DARWIN image processor (Telewski et al. 1983 Plant Physiol 72: 177-181), is described and demonstrated in the analysis of gravitropism and thigmomorphogenesis in corn seedlings (Zea mays). Using this system, growth and bending of regularly shaped plants or organs can be quickly and accurately measured without, in any way, interfering with the plant. Furthermore, the growth and bending curves are automatically plotted. Thigmomorphogenesis in the aerial part of corn seedlings involves growth promotion at a low force load and growth retardation at higher force loads. The time courses of the two kinds of response are somewhat different, with retardation occurring immediately after mechanical perturbation and growth promotion taking somewhat longer to begin. Gravitropic experiments show that when dark-grown corn seedlings are placed on their side in the light, the resulting curvature is due to two consecutive morphological mechanisms. In the first instance, lasting for about 15 minutes, the elongation of the bottom edge of the plant accelerates, while the elongation of the top edge remains constant. After that, for the next 1.75 hours, the elongation of the top edge decelerates and stops while that of the bottom edge remains constant at the increased rate for most of the period. The measurements taken from both experiments at relatively high resolution (0.08-0.1 millimeter) show that the growth curves are not smooth but show many small irregularities which may or may not involve micronutations.
本文介绍了一种基于达尔文图像处理器(Telewski等人,1983年,《植物生理学》72: 177 - 181)的非侵入式轴测系统,并展示了其在玉米幼苗(Zea mays)向重力性和触变形态发生分析中的应用。使用该系统,可以快速、准确地测量规则形状植物或器官的生长和弯曲情况,而不会以任何方式干扰植物。此外,生长和弯曲曲线会自动绘制。玉米幼苗地上部分的触变形态发生涉及低力负荷下的生长促进和高力负荷下的生长抑制。两种反应的时间进程有所不同,生长抑制在机械扰动后立即发生,而生长促进则需要稍长时间才开始。向重力性实验表明,当黑暗中生长的玉米幼苗在光照下侧放时,产生的弯曲是由于两种连续的形态机制。首先,持续约15分钟,植物底部边缘的伸长加速,而顶部边缘的伸长保持恒定。之后,在接下来的1.75小时内,顶部边缘的伸长减速并停止,而底部边缘的伸长在大部分时间内以增加的速率保持恒定。在相对高分辨率(0.08 - 0.1毫米)下从两个实验中获得的测量结果表明,生长曲线并不平滑,而是显示出许多小的不规则性,这些不规则性可能涉及也可能不涉及微突变。