Determination of fat in dairy products using pressurized solvent extraction.

Gravimetric fat data were obtained for a wide range of dairy products with fat contents ranging from 0.5 to 83% using pressurized solvent extraction at elevated temperatures and pressure (80-120 degrees C; 10.3 MPa). Extraction performance was sensitive to solvent composition, temperature, and sample matrix. By optimizing solvent mixtures, sample-solvent contact times of 8-10 min were sufficient for high recoveries from all products tested. The most successful solvents with regard to speed of extraction, selectivity, and recovery (average recovery, %) were various mixtures of hexane (or petroleum ether)-dichloromethane-methanol for dried cream (99.8%), dried whole milk (99.6%), dried buttermilk (98.2%), dried skim milk (97.0%), dried whey protein concentrate (97.5%), casein (95.0%), and caseinate (102.1%); petroleum ether-acetone-ethanol or petroleum ether-acetone-isopropanol for cheddar-type cheese (99.4%); petroleum ether-acetone for butter (99.9%); petroleum ether-acetone-isopropanol for cream (100.3%); and petroleum ether-isopropanol for liquid milks (99.0%). Relative standard deviations for repeatability were obtained for dried whole milk (0.2%), dried whey protein concentrate (0.7%), cheese (0.3%), butter (0.1%), and ultraheat treated (UHT) milk (0.7%). Solvent removal and drying of extracts with a heated block evaporator saved time compared with conventional drying ovens. Estimated savings in labor (50-75%) and solvents (80%) were substantial compared with the manual Mojonnier methods.