Suppr超能文献

多排螺旋CT门静脉造影:三种成像模型的比较

CT portography by multidetector helical CT: comparison of three rendering models.

作者信息

Nakayama Yoshiharu, Imuta Masanori, Funama Yoshinori, Kadota Masataka, Utsunomiya Daisuke, Shiraishi Shinya, Hayashida Yoshiko, Yamashita Yasuyuki

机构信息

Department of Radiology, Kumamoto University School of Medicine, Japan.

出版信息

Radiat Med. 2002 Nov-Dec;20(6):273-9.

Abstract

PURPOSE

To assess the value of multidetector CT portography in visualizing varices and portosystemic collaterals in comparison with conventional portography, and to compare the visualizations obtained by three rendering models (volume rendering, VR; minimum intensity projection, MIP; and shaded surface display, SSD).

METHODS

A total of 46 patients with portal hypertension were examined by CT and conventional portography for evaluation of portosystemic collaterals. CT portography was performed by multidetector CT (MD-CT) scanner with a slice thickness of 2.5 mm and table feed of 7.5 mm. Three types of CT portographic models were generated and compared with transarterial portography.

RESULTS

Among the 46 patients, 48 collaterals were identified on CT transverse images, while 38 collaterals were detected on transarterial portography. Forty-four of 48 collaterals identified on CT transverse images were visualized with the MIP model, while 34 and 29 collaterals were visualized by the VR and SSD methods, respectively. The average CT value for the portal vein and varices was 198 HU with data acquisition of 50 sec after contrast material injection.

CONCLUSIONS

CT portography by multidetector CT provides excellent images in the visualization of portosystemic collaterals. The images of collaterals produced by MD-CT are superior to those of transarterial portography. Among the three rendering techniques, MIP provides the best visualization of portosystemic collaterals.

摘要

目的

与传统门静脉造影相比,评估多排螺旋CT门静脉造影在显示静脉曲张和门体侧支循环方面的价值,并比较三种成像模式(容积再现,VR;最小密度投影,MIP;表面阴影显示,SSD)所获得的图像。

方法

对46例门静脉高压患者进行CT和传统门静脉造影检查,以评估门体侧支循环。采用层厚2.5mm、床速7.5mm的多排螺旋CT(MD-CT)扫描仪进行CT门静脉造影。生成三种类型的CT门静脉造影模型,并与经动脉门静脉造影进行比较。

结果

46例患者中,CT横断图像上发现48个侧支循环,经动脉门静脉造影发现38个侧支循环。CT横断图像上发现的48个侧支循环中,44个可通过MIP模式显示,而VR和SSD方法分别显示34个和29个侧支循环。注射对比剂后50秒采集数据时,门静脉和静脉曲张的平均CT值为198HU。

结论

多排螺旋CT门静脉造影在显示门体侧支循环方面提供了优质图像。MD-CT生成的侧支循环图像优于经动脉门静脉造影。在三种成像技术中,MIP在显示门体侧支循环方面效果最佳。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验