Suppr超能文献

陶瓷股骨头骨折后进行的全髋关节翻修置换术。一项多中心生存研究。

Revision total hip arthroplasty performed after fracture of a ceramic femoral head. A multicenter survivorship study.

作者信息

Allain Jérôme, Roudot-Thoraval Françoise, Delecrin Joel, Anract Philippe, Migaud Henri, Goutallier Daniel

机构信息

Service de Chirurgie Orthopédique, Hôpital Henri Mondor, Créteil, France.

出版信息

J Bone Joint Surg Am. 2003 May;85(5):825-30. doi: 10.2106/00004623-200305000-00009.

Abstract

BACKGROUND

The alumina ceramic femoral head was introduced for total hip arthroplasty approximately thirty years ago. One of its main drawbacks was the risk of implant fracture. The aim of this study was to examine the results of revision total hip replacement performed specifically to treat a fracture of a ceramic femoral head and to identify technical factors that affected the outcomes.

METHODS

One hundred and five surgical revisions to treat a fracture of a ceramic femoral head, performed at thirty-five institutions, were studied. The patients were examined clinically by the operating surgeon at the time of the last follow-up. The surgeon provided the latest follow-up radiographs, which were compared with the immediate postoperative radiographs. The success of the revisions was assessed with Kaplan-Meier survivorship analysis, with the need for repeat revision as the end point. We evaluated the complication rate and radiographic changes indicative of implant loosening. The average duration of follow-up between the index revision and the last clinical and radiographic review was 3.5 years (range, six months to twenty years).

RESULTS

Following the revisions, radiographic evidence of cup loosening was seen in twenty-two hips (21%) and radiographic evidence of femoral loosening was seen in twenty-two (21%). One or several repeat revisions were necessary in thirty-three patients (31%) because of infection (four patients), implant loosening (twenty), osteolysis (eight), or fracture of the revision femoral head component (one). The survival rate at five years was 63% (95% confidence interval, 51% to 75%). The survival rate was significantly worse when the cup had not been changed, when the new femoral head was made of stainless steel, when a total synovectomy had not been done, and when the patient was less than fifty years old.

CONCLUSIONS

Fracture of a ceramic femoral head component is a rare but potentially serious event. A suitable surgical approach, including total synovectomy, cup exchange, and insertion of a cobalt-chromium or new ceramic femoral ball minimizes the chance of early loosening of the implants and the need for one or more repeat revisions.

LEVEL OF EVIDENCE

Therapeutic study, Level IV (case series [no, or historical, control group]).

摘要

背景

大约三十年前,氧化铝陶瓷股骨头被引入全髋关节置换术。其主要缺点之一是植入物骨折的风险。本研究的目的是检查专门为治疗陶瓷股骨头骨折而进行的翻修全髋关节置换术的结果,并确定影响结果的技术因素。

方法

研究了在35家机构进行的105例治疗陶瓷股骨头骨折的手术翻修病例。在最后一次随访时,由主刀医生对患者进行临床检查。医生提供了最新的随访X线片,并与术后即刻X线片进行比较。采用Kaplan-Meier生存分析评估翻修的成功率,以再次翻修的需求作为终点。我们评估了并发症发生率和提示植入物松动的影像学变化。初次翻修与最后一次临床和影像学检查之间的平均随访时间为3.5年(范围为6个月至20年)。

结果

翻修后,22例髋关节(21%)出现髋臼松动的影像学证据,22例(21%)出现股骨松动的影像学证据。33例患者(31%)因感染(4例)、植入物松动(20例)、骨溶解(8例)或翻修股骨头部件骨折(1例)需要进行一次或多次再次翻修。五年生存率为63%(95%置信区间,51%至75%)。当髋臼未更换、新股骨头由不锈钢制成、未进行全滑膜切除术以及患者年龄小于50岁时,生存率明显更差。

结论

陶瓷股骨头部件骨折是一种罕见但可能严重的事件。合适的手术方法,包括全滑膜切除术、髋臼置换以及插入钴铬合金或新的陶瓷股骨头,可以将植入物早期松动的机会和一次或多次再次翻修的需求降至最低。

证据水平

治疗性研究,IV级(病例系列[无或历史对照组])。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验