Suppr超能文献

陶瓷髋臼内衬在冲击条件下的力学性能。

Mechanical performance of ceramic acetabular liners under impact conditions.

作者信息

Maher Suzanne A, Lipman Joseph D, Curley Luke J, Gilchrist Michael, Wright Timothy M

机构信息

Laboratory for Biomedical Mechanics and Materials, Hospital for Special Surgery, New York, New York 10021, USA.

出版信息

J Arthroplasty. 2003 Oct;18(7):936-41. doi: 10.1016/s0883-5403(03)00335-8.

Abstract

Although new generation alumina ceramics have exhibited a reduced incidence of fracture, concern still persists about the behavior of ceramic acetabular liners under impact conditions. The objective of this study was to explore whether fracture of a new generation alumina ceramic liner was likely to occur in vivo. Ceramic liners were impacted with forces of 23, 21, 15, and 12 kN (n = 3 at each force). At 23 kN, all 3 ceramic liners fractured on the first impact; at 12 kN none of the ceramic liners fractured after 20 impacts. The threshold force of 12 kN is large in comparison with estimated physiologic forces on the hip during falls or stumbling, suggesting that ceramic liner fracture is not a definite consequence of liner impact.

摘要

尽管新一代氧化铝陶瓷的骨折发生率有所降低,但人们仍对陶瓷髋臼内衬在冲击条件下的性能存在担忧。本研究的目的是探讨新一代氧化铝陶瓷内衬在体内是否可能发生骨折。用23、21、15和12 kN的力冲击陶瓷内衬(每个力下n = 3)。在23 kN时,所有3个陶瓷内衬在第一次冲击时就发生了骨折;在12 kN时,20次冲击后没有一个陶瓷内衬发生骨折。与跌倒或绊倒时髋关节估计的生理力相比,12 kN的阈值力较大,这表明陶瓷内衬骨折并非内衬受到冲击的必然结果。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验